Alcohol Countermeasure Systems Alcolock V3 B-2 Series Manual de instruções - Página 15
Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste Alcohol Countermeasure Systems Alcolock V3 B-2 Series. Alcohol Countermeasure Systems Alcolock V3 B-2 Series 20 páginas.
Imprimir página
MAINTENANCE & TROUBLESHOOTING
ACCESSING MAINTENANCE FUNCTIONS
ALCOLOCK V3 device maintenance functions can only be accessed by your dealer
using a System Code provided from ACS. This code is randomly generated and
changes daily. The use of this function is stored in the log.
SERVICING THE VEHICLE
When the vehicle requires service and an ALCOLOCK V3 device is installed, a Dealer
Code provided from your dealer can be used to start the motor. This code is randomly
generated and changes daily. The use of this code is stored in the log.
CALIBRATION
Yearly calibration is required to maintain optimum breath test accuracy. The handset
displays a message 14 days before calibration is due. Calibration is performed with
either a breath alcohol simulator or a gas alcohol reference.
TROUBLESHOOTING TABLE
The following table lists basic problems that may occur, along with their solutions. For
other problems, contact your dealer.
IF V3...
Will not turn on
Displays an error code
Aborts a breath test
Is in permanent lockout
Requires service
INSTRUCTION MANUAL
YOU SHOULD...
Check the vehicle battery
Refer to the table of messages on the next page
Retry the test, or investigate the Abort code
Contact your dealer
Contact your dealer
10