Alcolock LR max Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste Alcolock LR max. Alcolock LR max 15 páginas. Alcohol interlock
Imprimir página
2. The status light will
Breath test
required
WARNING! Failure to complete the arrival test
may result in recall and a program violation.
a. If no alcohol is
Arrival test
completed
b. If alcohol is detected
Arrival test
completed
c. If alcohol is detected
Lockout
xx:xx
WARNING! A subsequent FAIL test result will
cause another lockout period and may result
in recall and a program violation.
INSTRUCTION MANUAL
flash green and the
handset will display
Breath test required.
Provide an accepted
breath sample.
detected, the status
light will be solid green
to indicate PASS result
and the handset will
display Arrival test
completed.
below the FAIL set
point, the status light
will be solid amber
to indicate caution
and the handset will
display Arrival test
completed.
at or above the
FAIL set point, the
status light will be
solid red and the
handset will display
Lockout xx:xx (min)
to indicate the wait
time before attempting
another breath test.
Warm-Up and Standby
[These are optional features subject to
jurisdiction approval.]
1. If applicable, the
Drive Safely
Warm-Up
2. Warm-up is displayed
Warm-Up
Exit
After the prescribed time period, the
Warm-Up mode automatically ends,
or manually exit Warm-Up mode by
pressing and holding the right button or
pressing the accelerator pedal.
Upon exit from Warm-up, a Retest is
required.
Drive Safely
Standby
Standby
Hold to Exit
ALCOLOCK LR device
may be placed in
Warm-Up mode by
pressing and holding
the left navigation
button when the
engine is running after
an initial breath test
and while the vehicle
remains parked.
and the vehicle engine
can remain idling
without requiring
another breath test
for the prescribed
time period (default is
30 minutes).
The Standby mode
is similarly available.
When the vehicle is
safely parked and idling,
press and hold the left
navigation button to
enter the Standby mode.
Standby is displayed
and the vehicle engine
can remain idling without
requiring another breath
test for a prescribed
time period (default is
30 minutes).
Exit Standby in the
same manner as for
Warm-up, after which a
retest is required.
11