ALcom AT6128 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Telefone sem fios ALcom AT6128. ALcom AT6128 14 páginas.

using numerical key and press SET key to confirm.

After set baby call function to ON state, pressing any key except REDIAL key or picking up

handset will dial out the baby call number automatically.

When baby call function is ON state, you can still answer the incoming call.

NOTE: If you don't use the function, enter baby call function setting as per above operation and

select BABYCALL OFF, press SET key to confirm.

In on-hook state, press and hold CAL key 3 seconds, key tone is active when hearing "di" voice.

Press and hold CAL key 3 seconds again, key tone is inactive when hearing "di" voice.

CALCULATOR FUNCTION

In on-hook state, press CAL key, LCD displays 0_, and the telephone unit goes into calculator

mode. The telephone is now available for calculator operation. In this mode, #/= key is used as "=",

the

key is used as ".", OUT/X key and FLASH/÷ key are used as X and ÷ respectively, and

UP/+ and DOWN/- keys are used as plus and minus sign respectively.

Eg.1 (10+26) ÷2

1. In on-hook state, press CAL key

2. Press (1, 0, +, 2, 6), ÷, 2, #/= keys

3. After calculation, press SET key to quit.

Eg.2 0.5× 0.6-1

1. In on-hook state, press CAL key

2. Press 0,

., 5, ×, 0,

3. After calculation, press SET key to quit.

NOTES

Please unplug telephone line when installing / replacing batteries.

No voice

Check if the handset is on the phone or if the line has terminated.

Receive only

Check if P/T mode is properly set.

Check if the unit is locked; use the key to unlock it.

Rusty batteries or leakage

Remove the rust or wipe away the leakage.

Noise

Check if the circuit is spoilt. Change the circuit.

Check if the connector is wet or rusty, change the connector.

., 6, -, 1, #/= keys