Ergo In Demand 30-500-22 Instruções de instalação - Página 2

Procurar online ou descarregar pdf Instruções de instalação para Ferramentas Ergo In Demand 30-500-22. Ergo In Demand 30-500-22 2 páginas.

To adjust monitors:

Laterally: Place hand on bottom of

monitor and lift slightly to support weight.

Monitor will slide along bar.

Left/Right and Up/Down: Grasp monitor

with both hands and adjust to desired

position.

To tension the vertical adjustment to the

weight of monitor: Tighten the 5mm bolt

on the right side of the pivot with the

allen wrench provided.

To adjust height on wings: take weight off monitor by lifting underside of monitor then turn knob on bottom of

wing to adjust height (models 30-500-33 and 30-500-44 ONLY)

To extend wings: Loosen knobs on back of wing and extend bar to desired length depending on the size

monitors being used. Re-tighten knobs.

To adjust all monitors vertically as a unit: Simply turn crank handle on top of assembly.

Ergo In Demand, Inc.

4900 Industry Drive

Central Point, Oregon 97502

800-888-6024 (phone)

541-779-0829 (fax)