Clarion FZ105BT Manual do proprietário e manual de instalação - Página 8
Procurar online ou descarregar pdf Manual do proprietário e manual de instalação para Sistema estéreo para automóvel Clarion FZ105BT. Clarion FZ105BT 10 páginas. Usb/mp3/wma digital media recevier
Também para Clarion FZ105BT: Manual do proprietário e instruções de instalação (17 páginas)
Imprimir página
Play / Pause
Press the [
] button to pause the track/song
that is currently playing.
Press the [
] button to resume playing the
track/song that has been paused.
Selecting a Track
1. Press the [
] button to advance to the
next track/song.
Press the [
] button to go to previous
track/song.
2. Press and hold the [
] button to fast
forward through the track/song.
Press and hold the [
] button to fast
backward through the track/song.
6. TROUBLESHOOTING
GENERAL
Problem
Cause
Unit fuse blown.
Unit cannot
power on.
Car battery fuse blown.
No/low audio
Improper audio output connection.
output.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is in contact
with metal part of car.
Speaker power rating does
Poor sound
quality or
not match unit.
distortion.
Wrong connections.
Speaker is shorted.
Incorrect connection between
Unit resets itself
ACC and Battery.
when engine is off.
8
FZ105BT
Note:
Playing order will depend on Bluetooth audio
player. When [
] button is pressed, some
A2DP devices will restart the current track
depends on the duration of playback.
During music streaming playback "A2DP" will
be shown on the display. When A2DP and
HFP device is disconne ct , " BLUETOOTH
DISCONNECT" will be shown on the display
and return to previously selected audio source.
Some Bluetooth audio players may not have
play / pause synchronized with this unit. Please
make sure both device and main unit are in the
same play / pause status in BT MUSIC mode.
ID3 Display
During music streaming playback, press [INFO] to
view the ID3 display information:
TITULO -> ARTIST -> ALBUM -> CLOCK
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Check wiring and correct.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check the wiring and correct.
USB
Problem
Cause
USB device cannot
The USB device has been
inserted with wrong direction.
be inserted.
The USB connector is broken.
The USB device is damaged.
USB device is not
recognized.
Connectors are loose.
No sound heard with
No MP3/WMA file is stored in
the display "No File"
the USB device.
shown.
Sound skips or is
MP3/WMA files are not
noisy.
encoded properly.
Bluetooth
Problem
Cause
Cannot pair the
The device does not support the
profiles required for the system.
Bluetooth enabled
device with the
The Bluetooth function of the
device is not enabled.
audio system.
The audio quality is
The Bluetooth reception is poor.
poor after connection
with a Bluetooth-
enabled device.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Measure
Use another device to connect.
Refer to the user manual of the device for how
to enable the function.
Move the device closer to the audio system or
remove any obstacle between the device and
the system.