AlcoSense ELITE Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste AlcoSense ELITE. AlcoSense ELITE 20 páginas.
Imprimir página
- 1. Table of Contents
- 2. Introduction
- 3. Getting Started
- 4. Turning On/Off
- 5. Setting Time
- 6. Changing Units of Measurement
- 7. Activating the Sensor
- 8. Automatic Sensor Clean (ASC)
- 9. How to Establish if an ASC Is Needed
- 10. Quick Sensor Clean
- 11. Performing a Blow Test
- 12. Understanding the Results
- 13. Maintaining Your Alcosense
- 14. Accessories
- 15. Servicing
- 16. Legal
Performing a 'Quick Clean'
After every breath test the unit performs a quick clean on the sensor – this
can be heard by a buzzing noise. If you wish to perform a quick clean of the
sensor at another time this can be performed by following these steps:
1. Press and hold down the MODE key until you hear a beep.
2. Repeatedly press the MODE key until the indicator reaches the 'clean'
icon, located at the bottom left of the screen, then press the SET
key once.
3. The screen will then display the words 'OFF'. To start a clean, press the
+ key once and the screen will display 'ON' and then count down from
8 to 0 and you will hear a buzzing sound. When complete, the screen will
display 'OFF' and the buzzing will stop.
4. To exit from this mode press the SET key once and the AlcoSense will
return to the standby mode.
Please note: We recommend performing a full ASC (Auto Sensor Clean)
regularly.
11