AerAtron FR3-42 Manual do utilizador e manual de instalação - Página 8

Procurar online ou descarregar pdf Manual do utilizador e manual de instalação para Ventilador AerAtron FR3-42. AerAtron FR3-42 18 páginas.

Pairing the Remote Control

STEP 6

Pairing a Single Fan per remote control: LEARN MODE

1. On Receiver: Verify that the "Learn" switch is in the "O" position

2. Slide battery cover to unlock - Locate the LEARN BUTTON &

insert batteries.

3. Switch on the main power to activate the receiver, indicated

by one beep. (Energise one fan reciever at a atime).

4. Within 60 seconds after the power is turned on (one beep),

press and hold the LEARN button on the Remote Control

(min. 3 secs.) until Fan Receiver issues three 'beeps' which

indicates successful pairing.

5. On Receiver: switch the "Learn" switch to "X" (this will

lock the pairing code with the remote)

6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test

fan functions.

7. To re-pair, repeat steps 3 to 5

NOTE: Power must be oﬀ for 10 seconds min. before repairing.

The Remote Control and Fan Receiver will memorise the pairing

code for future use even if mains power is switched oﬀ.

LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.

(Light will maintain last setting if turned oﬀ)

Pairing

One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify that the

"Learn" switch is in the "O" position. Switch on the mains power to activate ALL receivers at the same time,

indicated by one 'beep'. Within 60 seconds, press and hold the LEARN button on the remote control (min. 3

seconds) until fan receiver issues three 'beeps'.

Pairing is always required during setup.

Note: "Learn" switch on receiver (STEP 4)

per Remote Control.

Controlling the Fan

Use forward mode (clockwise) for cooling.

warm air.

LIGHT SWITCH

'LEARN' BUTTON

O LIGHT DIMMING

| LIGHT ON/OFF

Speed Up/Down - 1-6 Speed

. (LIGHT SWITCH