Clarion MF2 Instruções de instalação - Página 2
Procurar online ou descarregar pdf Instruções de instalação para Equipamento marítimo Clarion MF2. Clarion MF2 2 páginas. Marine wi-fi remote module with app control
Imprimir página
1
2
7
3
On / O
On / O
Source
Source
Sourdine / Pause
Mute / Pause
Volume Down
Abaisser le Volume
Monter le Volume
Volume Up
Recherche / Piste vers le haut
Seek / Track Up
Seek / Track Down
Recherche / Piste vers le Bas
Play / Pause
Jour / Pause
9
A chage
9
Display
Entrer
10
10
Enter
11
Mode
Mode
11
Exposition
Display
12
12
12
5
9
8
6
10
11
4
Prendido / Apagado
Fuente
Silencio / Pausar
Bajar volumen
Subir volumen
Busqueda / Sintonía hacia arriba
Busquieda / Sintonía hacia abajo
Reproducir / Pausar
9
Display
10
Entar
11
Modo
Visualización
12
Marine Radio Models with 8-pin DIN Connector
With the radio turned off, connect the 8-pin male DIN remote connector to the MF2 reciever module into the
"Wired Remote Connector" at the back of the radio. No other connections are necessary.
Power and ground will be supplied through the DIN connector.
Wi-Fi Connection Instructions
1. Turn on the Clarion marine radio.
2. To configure the Wi-Fi network from your iOS device, enter the Wi-Fi settings menu
3. Turn on your Wi-Fi feature.
3. Once Wi-Fi is on, your device will automatically search and display the available MF2 Wi-Fi network *SSID.
4. Tap the name of the Wi-Fi SSID associated to the Clarion MF2.
5. When your device is connected to the Wi-Fi network, a checkmark will appear to the left of the network name.
6. To confirm connection, rotate the volume knob on the Clarion marine radio prior to using the MF2 app.
Note: Should your phone lose its Wi-Fi connection with the MF2 or fails to connect, go to your
Wi-Fi Settings and attempt reconnecting to your wireless network.
*SSID (Service Set Identifier) : Name used for user group to share files over any network, wired or wireless.
Discover other marine electronics & navigation on our website.
8-P DIN to radio