ergochair Ergo - Scoot Low-Profi le Creeper Manual de montagem e do utilizador

Procurar online ou descarregar pdf Manual de montagem e do utilizador para Mobiliário de interior ergochair Ergo - Scoot Low-Profi le Creeper. ergochair Ergo - Scoot Low-Profi le Creeper 2 páginas.

Imprimir página

Ergo - Scoot™ Low-Proﬁ le Creeper

Assembly and User Guide

Guide P/N: 5900300 Rev. A - May 2023

Ergo-Scoot Descrip on

The Ergo-Scoot™ (5160118) is a reclining low-proﬁ le creeper seat. Providing

increased mobility on a stable pla orm as you work on, around and under

Vehicles. A gas spring supports the backrest allowing posi ons from ≈5° to 60°

while four 360° swivel casters allow freedom of movement and comfort while

working.

Included with the Scoot:

•

Assembly and User Guide

•

2 Tool/Parts Trays

•

Spacer Kit (increases ground clearance to ≈1.2 in. / 30 mm)

•

Riser Kit - Adds ≈8 to 12 in. (200 to 300 mm)

a ribu on to BendPak Inc., you will not make changes to the content, you do not gain any rights to this content, and you will not use the

copies for commercial purpose.

Trademarks. Ergochair and the Ergochair logo, BendPak and the BendPak logo are registered trademarks of BendPak Inc. All other company,

product, and service names are used for iden ﬁ ca on only. All trademarks and registered trademarks men oned in this Manual are the

property of their respec ve owners.

Limita ons. Every eﬀ ort has been made to ensure complete and accurate instruc ons are included in this Guide. However, product updates,

revisions, and/or changes may have occurred since this Guide was published. BendPak reserves the right to change any informa on in this

Guide without incurring any obliga on for equipment previously or subsequently sold. BendPak is not responsible for typographical errors in

this Guide. You can always ﬁ nd the latest version of the Assembly and User Guide for your product on the BendPak website.

Warranty. The BendPak warranty is more than a commitment to you: it is also a commitment to the value of your new product. Contact your

nearest BendPak dealer or visit www.bendpak.com/support/warranty for full warranty details.

Go to bendpak.com/support/register-your-product/ and ﬁ ll out the online form to register your product (be sure to click Submit).

Safety. Your Ergo-Scoot was designed and manufactured with safety in mind. However, your safety also depends on proper training and

though ul opera on. Do not install, operate, maintain, or repair the unit without reading and understanding this Assembly and User Guide and

the labels on the unit. Do not use the Ergo-Scoot unless you can do so safely!

Ergo-Scoot Safety Informa on

•

Please read this en re guide prior to use. Failure to follow the instruc ons and safety precau ons in this guide can result in serious

injury. By proceeding with setup and opera on, you agree that you fully understand the contents of this guide and assume full

responsibility for the use of this product. Always inspect the Scoot for loose or damaged components prior to each use. If a problem

exists resolve the issue. If the issue cannot be resolved, cease all use and contact your authorized Ergochair parts provider.

•

Always be alert and aware of dangers around you while using this equipment.

•

Only use the Scoot on hard, ﬂ at surfaces.

•

Always sit down on the Ergo-Scoot gently. Avoid shock loads caused by jumping or falling onto the seat.

•

Never stand on the Ergo-Scoot or use it for a purpose for which it was not designed.

•

Do not allow unsupervised children or persons to use this product.

•

This product is not a toy. Never use as a skateboard or dolly.

•

Beware of pinch and crush hazards when using or adjus ng the seat posi on on this product. When making seat

adjustments, keep hands clear.

•

Be aware of the Maximum Weight limit for the Ergo-Scoot. Do not remove Vehicle components that, when combined with your own

weight, exceed the maximum weight ra ng of 350 lbs. / 159 kg.

•

Replace warning labels that are damaged or illegible.

•

Do not operate your Ergo-Scoot if you ﬁ nd maintenance issues or it operates in an abnormal manner. Take it out of service, then contact

BendPak Technical Support, email [email protected] or call (800) 253-2363 op on 7, then 4.

Ergo-Scoot Speciﬁ ca ons:

Length (backrest up)

Seat Width

Max. Width

Headrest Width

Seat Height

Height (backrest up)

Length (backrest down)

Height (backrest down)

Backrest Angle

Ground Clearance

Riser Kit Installed

California Proposi on 65: This product can expose you to chemicals including styrene and vinyl chloride, which are on the list of over

1645 Lemonwood Drive

900 chemicals iden ﬁ ed by the State of California to cause cancer, birth defects, or other reproduc ve harm. Always use this product in

Santa Paula, CA 93060 USA

accordance with BendPak Ergochair's instruc ons. For more informa on, visit www.p65warnings.ca.gov.

(800) 253-2363 bendpak.com

•

Ergo-Scoot Weight: 87 lbs. / 39.5 kg.

32 in. / 813 mm

•

Backrest Adjustment Angle: 0° to ≈60°

14.8 in. / 376 mm

•

Backrest Locking Mechanism : Gas Spring

23.6 in. / 600 mm

•

Casters: Four 360° Casters (2 locking), Ø75 mm x 25 mm, sleeve

17.75 in. / 451 mm

bearings, oil resistant, non-marking rubber wheels

6.9 in. / 175 mm*

•

Seat Materials: Padded Marine Vinyl Backrest and Seat. Marine

31.5 in. / 800 mm*

Vinyl is abrasion, chemical and oil resistant

•

Frame Materials: Full powder coated, welded tubular steel

45.7 in. / 1,160 mm

•

Tool Box inside dimensions: 13.75 x 4.6 x 3.75 in. / 349 x 117.4 x 95.2 mm

9.5 in. / 241 mm*

Caster Kit adds ≈1.2 in. / 30 mm.

≈5° to 60°

Riser Kit adds ≈8 to 12 in. Max. (200 to 300 mm max.)

.4 in / 10 mm*

Three locking pin posi ons allow ≈2 in. / 50 mm riser adjustments.

(3 in./ 76.2 mm w/o Trays)

All speciﬁ ca ons subject to change without no ce.

Assembly and User Guide

P/N 5900300 - Rev. A - May 2023

Riser