XBOX ClubSport Fanatec Manual - Página 18

Procurar online ou descarregar pdf Manual para Consola de jogos XBOX ClubSport Fanatec. XBOX ClubSport Fanatec 41 páginas.

Note: The Universal Hub for Xbox One

comes fully assembled out-of-box. The

following steps explain how the assem-

bly has to be done correctly in case you

want to change the number of used but-

ton boxes or adjust their positions.

First you need to take off the frontplate of the

Universal Hub by loosening the four screws

on the backside as described above. Then

choose the holes where you want to mount

a button box or the FunkySwitch

note that the holes with gears must be used

for mounting of the rim! Put on the button

box lever or FunkySwitch

side of the frontplate. Then use the special

screw S1 (M5 x 11 mm) and put it through

the lever's hole and then through the chosen

hole on the frontplate. Turn on a nut N1 (M5

x 7.8 mm x 4.7 mm) onto the screw gears from the inside of the frontplate.

Adjust the lever position according to your favour and to the used rim and then

tighten the nut N1 on the screw S1. The position of the button box or Funky-

Switch

is fixed now.

Then connect the cable of the button box or the FunkySwitch

socket on the electronics. Please see further description about the sockets at

the end of this chapter as well as chapter 7 of this user manual.

. Please

lever on the out-

to the specified