Xerox DOCUCOLOR 12 Manual de iniciação - Página 20

Procurar online ou descarregar pdf Manual de iniciação para Impressora Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 24 páginas. Carrier
Também para Xerox DOCUCOLOR 12: Especificações (2 páginas), Manual de referência (10 páginas), Manual de início rápido (5 páginas), Manual de início rápido (8 páginas), Utilização do manual (12 páginas), Manual suplementar (4 páginas), Manual de Suplementos (18 páginas)

Replacing a dry ink cartridge

Replacing dry ink

You need to replace dry ink when the Touch Screen dis-

plays a message indicating that one of the color dry inks

is low.

1. See Figure 23. Open the front door of the DocuColor

12 Printer. (See Figure 18 on page11.)

2. Place some paper on the floor to catch any spillage.

3. Remove the dry ink cartridge to be replaced by turn-

ing the cartridge counterclockwise until the large

arrow on the cartridge aligns with the unlocked

symbol on printer.

4. Pull the cartridge out of the housing and dispose of

it according to local regulations.

5. Remove the new dry ink cartridge from the package.

6. Shake the cartridge from side to side vigorously for

at least 15 seconds.

7. Align the arrow on the top of the cartridge with the

raised arrow at the top of the housing and push the

cartridge all the way in.

8. Turn the cartridge clockwise until the large arrow

on the cartridge is aligned with the locked symbol

on the printer. This locks the cartridge into place.

Note: You cannot lock a cartridge into an incorrect

housing.

9. Close the front door of the printer. See Figure 24.

10. Remove the paper from the floor.

Figure 23

Figure 24

Getting to Know Your Product

Product Orientation Guide