3Com Oven Notas de lançamento - Página 3
Procurar online ou descarregar pdf Notas de lançamento para Hardware de rede 3Com Oven. 3Com Oven 16 páginas. 3com oven user manual
Imprimir página
Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3
Supported Browsers
To access the 3Com AsteriskGUI, use the Firefox browser, Release 1.5 or a later release.
Note: If you exit the browser, a new browser session might not require a user to provide login
information and allows full access to the 3Com AsteriskGUI. To ensure that users are required to
provide a username and password each time a new browser window opens:
From the Firefox toolbar, click Tools > Options.
1
Click the Privacy icon.
2
In the Private Data dialog box, enable Always clear my private data when I close Firefox.
3
Click OK.
4
Fax Support
The 3Com Asterisk Appliance supports analog-to-analog fax transmission. Fax detection and
routing are supported using analog FXS connections. Note that IP-to-analog fax transmission is
not supported.
Saving Configuration Changes
The 3Com AsteriskGUI includes these controls:
Save – changes are made in memory, however, they are not active or permanent
Activate Changes (in the upper right of the page) – makes any changes active, however,
the changes are not permanent
Save Configuration (on the Home page) – changes are permanently retained after you
reboot or power cycle the appliance
To ensure that you save any configuration changes permanently:
Click Save in the 3Com AsteriskGUI page in which you have made changes.
1
Click Home on the left navigation tab.
2
Click Save Configuration on the Home page.
3
Click Activate Changes in the upper right of the page.
4
Note: If you click Network > LAN, modify LAN settings, and then click Save, the changes
become effective immediately. Make sure that you enter the correct IP address so that you do
not lose access to the 3Com AsteriskGUI immediately after clicking the Save button.
Note: Before you remove the power cord from the 3Com Asterisk Appliance, make sure that you
complete and then save your configuration changes.
Page 3