Xerox PHASER 6250 Manual do software - Página 3

Procurar online ou descarregar pdf Manual do software para Impressora Xerox PHASER 6250. Xerox PHASER 6250 5 páginas. Color, laser, toner cartridge with chip
Também para Xerox PHASER 6250: Manual de opções (3 páginas), Manuallines (6 páginas), Manual da rede (7 páginas), Manutenção (3 páginas), Manual suplementar (5 páginas), Manual de referência rápida (11 páginas), Manual do software (5 páginas), Manual (8 páginas), Manual de configuração (2 páginas), Manual do utilizador (23 páginas), Manual de referência (11 páginas), Manual de instruções de configuração (9 páginas), Comparação da concorrência (2 páginas), Manual de definições (4 páginas), Manual de gestão (2 páginas), Manual do software (2 páginas), Instruções de manutenção (4 páginas), Manual de referência rápida (11 páginas), Manual de referência (9 páginas), Instruções de remanufacturação de cartuchos (9 páginas), Manual (39 páginas), Manual de referência rápida (11 páginas)

Requirements

Verify that you:

■

Are operating a Windows-based system with CentreWare DP software installed and at

least one printer driver installed

■

Are a NetWare Network Administrator, an administrative person with ADMIN/

SUPERVISOR, or ADMIN/SUPERVISOR EQUIVALENT within login rights to the

NetWare Server(s) servicing the Phaser printer

■

Have a basic knowledge of NetWare

Novell NetWare Troubleshooting Quick Check

Verify that the printer is plugged in, turned on, and connected to an active network.

Verify that the printer is receiving network traffic by monitoring the LEDs on the back of

the printer. When the printer is connected to a functioning network and receiving traffic,

its link LED is green, and its amber traffic LED is flashing rapidly.

Verify that the client is logged into the network and printing to the correct print queue.

Verify that the user has access to the Phaser printer queue.

Verify that the Phaser printer NetWare print queue exists, is accepting jobs, and has a print

server attached. If it does not, use the Setup Wizard in CentreWare DP to reconfigure the

print queue.

Print the "Configuration Page". Verify that Printer Server is enabled. Set the frame type

to the frame type your NetWare server is using.

Note

To determine your NetWare IPX frame type, type config at the Novell console screen.

On networks using multiple IPX frame types, it is critical that the frame type be set

correctly.

Verify that the Primary Server is set (NetWare 3.1x only). The primary server should

have been set during initial queue setup and installed using CentreWare DP. If it is not set,

use CentreWare DP to set it, then reset the printer.

Note

Setting the Primary Server is extremely important on large networks.

Go to

www.xerox.com/officeprinting/support

problem.

if the above steps fail to resolve the printing

Phaser® 6250 Color Laser Printer

3-41

Novell NetWare