Xerox Wide Format 6030 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Impressora Xerox Wide Format 6030. Xerox Wide Format 6030 22 páginas. Wide format twain
Também para Xerox Wide Format 6030: Notas de lançamento (7 páginas), Manual de configuração (20 páginas), Nota de lançamento (23 páginas), Nota de lançamento (8 páginas), Nota de lançamento (8 páginas), Nota de lançamento (9 páginas), Manual de formação de clientes (50 páginas), Manual do utilizador (36 páginas), Manual do utilizador (48 páginas)

Chapter 1 Installing Plotter Driver

Optional functions unique to the printer model can be set by clicking

[Options...] button.

These settings can be changed later by selecting [Device and Default

Selection] from the "Print/Plot Configuration" dialog box.

Setting items

Select paper type: Select type of paper to be used from Bond, Film, or Vellum

paper.

Paper size: Select paper size. For this driver, paper size must be selected here,

not at Paper Size and Orientation in the "Print/Plot Configuration" dialog box.

Length: When "Custom size" is selected at "Paper Size", its length can be set

in integral value in 1mm increments.

Set margin: Set a margin in the range of 0 to 10mm on each side of paper.

This margin reduces the maximum plotting area.

Fill: Set solid or halftone (dither) pattern for filling graphics or TrueType fonts

Select resolution: Select resolution for raster (picture image) output.

Image correction: Click here to open the sub-dialog for raster (picture image)

gamma correction.

Version: Version of this driver.

Red print: Not supported by this model.

Red-specified pen number: Not supported by this model.

Number of Copies: Specify the number of copies (1 to 99).

Select generated data: Select a plotter language (RTL/GL2/VCGL+MMR) to

generate the data. 'VCGL+MMR' is not supported by some of the plotter

models.

Options: Click the 'Options...' button to open the sub-dialog to set optional

functions unique to the selected plotter model.