Xerox DocuColor 2240 Manual de resolução de problemas - Página 14

Procurar online ou descarregar pdf Manual de resolução de problemas para Impressora tudo em um Xerox DocuColor 2240. Xerox DocuColor 2240 28 páginas. Scan using ftp server
Também para Xerox DocuColor 2240: Manual de ligação rápida (2 páginas), Especificações (2 páginas), Notas de segurança (15 páginas), Manual de início rápido (4 páginas), Manual de início rápido (4 páginas), Manual de início rápido (6 páginas), Manual do utilizador (36 páginas), Manual de serviço (18 páginas)

( T

S E R

U I D E

R O U B L E S H O O T I N G

Stapler Faults

5 – 1 0

)

This section describes how to clear stapler faults. Follow the

procedures on the following pages when copies are not stapled or

when staples are bent.

NOTE:

To staple copies, the Finisher (optional accessory) must

be installed.

Make sure that the machine has stopped, then open the front

cover in the Finisher.

Hold the staple cartridge by its lever, and pull the staple cartridge

out to the right toward you.

Lift up the staple cartridge to remove it.

After removing the staple cartridge, check the inside of the

Finisher for any remaining staples.

Pull up the lever on the front of the staple cartridge.

Remove the jammed staples together with the staple sheet.

NOTE:

When removing jammed staples, also remove the staple

sheet. Do not remove unused staples from the staple cartridge.

CAUTION:

Be careful when removing jammed staples to avoid

hurting your fingers.

Close the lever on the front of the staple cartridge until you hear it

click into place.

Return the staple cartridge to its original position until you hear it

click into place.

Close the Finisher front cover.

NOTE:

A message will be displayed and the machine will not

operate if the Finisher front cover is not closed completely.