Drivers
You can find the driver installation files on the customer CD entitled "Accxes Print Drivers", or
they can be downloaded from the www.xerox.com website (Select Support & Drivers. In the Wide
Format section select your printer group. Select the Drivers & Downloads link. Select the link of
the driver that you wish to install.)
Installing Drivers on a Server
A Windows 2000 or 2003 server system can have all of the drivers installed locally on it which all
of the workstations would require. Each workstation can then install the appropriate driver from
the server to make remote drivers.
HP-GL/2 Driver
These instructions describe how to install the HP-GL/2 printer driver locally on a workstation or
server.
To install a printer driver on a workstation from a server, see the section in this document entitled
"Remote Drivers". The printer driver must be installed on the server locally first, according to the
following instructions.
Note: Prior to installing this driver, you must remove all previous versions by following the
removal instructions.
The FreeFlow Accxes HP-GL/2 printer driver is delivered as a self-extracting zip file. Executing
this program will extract the files to a default directory or to a directory of the user's choice (e.g.
c:\temp). Use Window's Add Printer Wizard to add the printer, as described below.
Note: You must have administrator rights to install the driver and ports
You can install the HP-GL/2 driver on a standard TCP/IP port from one of the following
settings. If you are going to use the Standard TCP/IP Port, install it first, using the
directions in the following Standard TCP/IP Port Installation section. Then follow the
directions to install the HP-GL/2 driver. The control for Bi-directional is located on the
Device Options tab of the Printer Properties.
Standard TCP/IP Port Installation
1. Go to the Printers Folder.
For Windows 2000: Select Start > Settings > Printers
For Window 2003 or XP: Select Start > Control Panel > Printers and Faxes
2. Click on the File Menu.
3. Click on the Server Properties... menu item.
4. Select the Ports tab.
5. Click the Add Port... button.
6. Select Standard TCP/IP.
7. Click the New Port... button. Click Next.
Xerox FreeFlow Accxes Drivers & Client Software Installation Guide
1
Imprimir página