Xerox 3600DN - Phaser B/W Laser Printer Manual de configuração - Página 3

Procurar online ou descarregar pdf Manual de configuração para Acessórios para impressoras Xerox 3600DN - Phaser B/W Laser Printer. Xerox 3600DN - Phaser B/W Laser Printer 6 páginas. Letter-size black-and-white laser printer
Também para Xerox 3600DN - Phaser B/W Laser Printer: Manual de opções (1 páginas), Manual de instalação (2 páginas), Carta de Volatilidade (1 páginas), Manual de utilização rápida (2 páginas), Instruções de instalação (2 páginas), Manual rápido (2 páginas), Manual do avaliador (17 páginas), Instruções de instalação (2 páginas), Instruções de instalação (1 páginas), Manual de atualização de firmware (1 páginas), Atualização (1 páginas), Brochura e especificações (4 páginas), Manual rápido (4 páginas)

IPv6 Supplement

Configure IP Settings

This procedure enables the System Administrator to enable and configure IPv6 and IPv6 Filtering on

some Xerox WorkCentre/Phaser mono printers and Xerox WorkCentre/Phaser mono MFP products via

CentreWare Internet Services (CWIS).

Check the Xerox Support Website

supports IPv6, and whether the firmware level loaded on your Xerox product supports IPv6. Print a

Configuration Report from your Xerox device (under the Reports menu) and check the version of the

firmware. If it is less than the firmware listed on the website then you need to download new firmware

to enable IPv6 capabilities.

At your Workstation, open the Web browser and enter the TCP/IP Address of the machine in the

Address bar.

Press [Enter].

Click on the [Properties] tab.

Click on the [Connectivity] link.

Click on the [Protocols] link.

Select [TCP/IP] from the directory tree.

Scroll down the page to TCP/IPv6 area, for the Protocol click the [Enabled]checkbox.

The Link-Local Address is automatically populated.

Default DHCPv6 (Dynamic Host Configuration Protocol) Settings

The device performs auto-address DHCPv6 configuration every time it powers up. This is used for

neighbour discovery and address resolution on the local IPv6 subnet.

However, you can choose to use manual configuration, automatic configuration or a combination of

automatic and manual configuration.

Select one of the following options:

•

[Use DHCP as directed by a router] - this option is fully automatic. The DHCPv6 Address will

be obtained and displayed on the screen.

•

[Always Enable DHCP] - this option is fully automatic. The DHCPv6 Address will be obtained

and displayed on the screen.

www.support.xerox.com

for your Xerox product to determine if it

Configure IP Settings and IP Filtering