Xerox 3600V_N - Phaser B/W Laser Printer Manual de configuração - Página 5

Procurar online ou descarregar pdf Manual de configuração para Acessórios para impressoras Xerox 3600V_N - Phaser B/W Laser Printer. Xerox 3600V_N - Phaser B/W Laser Printer 6 páginas. How to upgrade by using the firmware upgrade utility
Também para Xerox 3600V_N - Phaser B/W Laser Printer: Manual de opções (1 páginas), Manual de instalação (2 páginas), Carta de Volatilidade (1 páginas), Manual de utilização rápida (2 páginas), Instruções de instalação (2 páginas), Manual rápido (2 páginas), Instruções de instalação (2 páginas), Instruções de instalação (1 páginas), Manual de atualização de firmware (1 páginas), Atualização (1 páginas)

Xerox 3600V_N - Phaser B/W Laser Printer Manual de configuração
The CentreWare Internet Services installation process is now completed.
Note:
If the Accounting feature is enabled, you may be required to enter a user ID and passcode
(if one is set up).
Note:
When your access to CentreWare Internet Services is encrypted, enter "https://" followed by
the Internet address, instead of "http://".
Note:
DHCP/DDNS: Release Registration – Allows DHCP resources to be released when the
machine is powering down. This is a display-only item and shows "Enabled".
IP Filtering
Overview
The IP Filtering is a security feature that allows you to control access to Internet Services. IP Filtering
allows you to prevent unauthorized access by TCP/IP (Transmission Control Protocol/Internet Protocol).
The IP Filtering feature provides security to the machine, by allowing you to register the IP addresses
permitted to communicate with the machine.

Enable IP Filtering

1.
At your Workstation, open the web browser, enter the TCP/IP Address of the machine into the
Address bar.
2.
Press [Enter].
3.
Click on the [Properties] tab.
4.
Click on the [Security] link.
5.
Select [IP Filtering] in the directory tree.
For IPv6 Filtering
6.
Checkmark the [IPv6 Filtering Enabled] box.
7.
Enter the permittable IP Address(es) access to the device in the following IP Address table.
Enter the IPv6 address in form of CIDR convention. Prefix indicates the number of leftmost bits to
be referenced.
For example:
2001:DB8:1234:215:215:99FF:FE04:D345 / 128 is used to reference a complete address.
2001:DB8:1234:215:215:99FF:FE04:D345 / 64 is used to reference prefix address consisted
of leftmost 64 bits only.
2001:DB8:1234:215:215:99FF:: / 80 is used to reference prefix address consisted of leftmost
80 bits only.
8.
Click on the [Apply] button to accept changes.
9.
If prompted, enter the Administrator's User ID [admin] and Password [1111], and click on
[Login].
10. Click on [OK].
Configure IP Settings and IP Filtering
IPv6 Supplement
3