Xerox Phaser 8200 Manual de configuração de rede - Página 23

Procurar online ou descarregar pdf Manual de configuração de rede para Acessórios para impressoras Xerox Phaser 8200. Xerox Phaser 8200 47 páginas. Phaser color printer
Também para Xerox Phaser 8200: Manual de instalação do módulo de tabuleiro (2 páginas), Manual de instalação (2 páginas), Manual de instalação (1 páginas), Manual de libertação rápida (1 páginas), Instalação (1 páginas), Manual (2 páginas), Especificações (4 páginas), Manual de serviço (11 páginas)

Xerox Phaser  8200 Manual de configuração de rede
20.
Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.
21.
Send a print job to the printer.
22.
Check the print job for print-quality. If print-quality problems exist or if your job did not print, see
the Phaser 8200 Color Printer User Guide to correct the problem or access PhaserSMART from
the Troubleshooting tab of your Windows driver.

Quick install steps (AppleTalk protocol)

Note
Services for Macintosh must be installed for AppleTalk to be available on an NT 4.x server.
1.
At the Desktop, right-mouse-click the Network Neighborhood icon and select Properties.
2.
Click the Protocols tab and verify that the AppleTalk protocol has been loaded.
3.
If the AppleTalk software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
4.
Open the Control Panel and double-click the Printers icon.
5.
Double-click Add Printer; the Add Printer Wizard starts.
6.
Verify that My Computer is selected and click Next>.
7.
Click Add Port.
8.
Select the AppleTalk Printing Devices and click New Port.
9.
Click Ethernet and select the device.
10.
Choose your printer device from the list, then click OK.
11.
Click OK. The Wizard returns you to the previous dialog. Verify that the port name you entered is
in the list and is correct. The check box to the left of the port name must be checked; if it is not,
check it, and then select Next>.
12.
Insert your printer's Software and Documentation CD-ROM into your computer's CD-ROM
drive and click Have Disk.
13.
Click the Browse button and select the directory containing the Windows NT drivers:
<CD Drive>:\instal\winnt40, and then click Open.
14.
Select the *.INF file, then click OK.
15.
The Wizard returns you to the previous dialog. Verify that the path and file name are correct and
click OK.
16.
At the next dialog, enter a name for the printer and select whether you want that printer to be the
default, and then click Next>.
17.
If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the share
checkbox, and then click Next>.
18.
At the next dialog it is recommended that you print a test print. Click Finish.
19.
Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.
Phaser® 8200 Color Printer
Windows NT 4.x Network
18