Xerox PHASER 5400 Manual de instalação rápida - Página 19
Procurar online ou descarregar pdf Manual de instalação rápida para Acessórios para impressoras Xerox PHASER 5400. Xerox PHASER 5400 40 páginas. 1000-sheet stacker
Também para Xerox PHASER 5400: Instruções técnicas (5 páginas), Manual (11 páginas), Instruções de instalação (2 páginas), Manual de papel (2 páginas)
Imprimir página
Windows 2000 Network
Introduction
Your printer can be installed on a Windows 2000 network using one of
three methods:
Microsoft TCP/IP protocol
Xerox TCP/IP Port Monitor
AppleTalk protocol
The Preliminary Steps given below must be accomplished for all
printers regardless of the method that is being used. Then, the Quick
Install Steps detail the installation process corresponding to the
method selected.
The CentreWare DP program on your Printer Management Software
CD-ROM can also be used to monitor and configure the printer.
Preliminary steps
1.
Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet. Retain this page for
reference.
2.
Check the Configuration Sheet and verify that both the desired
protocol and connector are enabled.
3.
Proceed to the Quick Install Steps for the installation method
selected.
Quick install steps (Microsoft TCP/IP protocol)
1.
At the Desktop, right-mouse-click the My Network Places icon
and select Properties.
2.
Right-mouse-click the Local Area Connection icon inside the
Network and Dial-up Connections window. Select Properties.
3.
Select the General tab and verify that Internet Protocol (TCP/IP)
is loaded.
Quick Network Install Guide
13