Xerox DocuColor 240 Nota de lançamento

Procurar online ou descarregar pdf Nota de lançamento para Scanner Xerox DocuColor 240. Xerox DocuColor 240 34 páginas. Printer-copier
Também para Xerox DocuColor 240: Manual de início rápido (47 páginas), Manual de instalação (2 páginas), Manual de início rápido (2 páginas), Manual de substituição de hardware (2 páginas), Manual de definições (6 páginas), Criação de folhetos para cópia (2 páginas), Lista de definições do sistema (2 páginas), Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual do avaliador (20 páginas), Manual do avaliador (18 páginas)

User

documentation

System software

Customer Release Notes

Fiery Network Controller for DocuColor 250/240,

version 1.0

This document contains information about the Fiery Network Controller for DocuColor

250/240 version 1.0. Before using the Fiery Network Controller for DocuColor 250/240

with version 1.0, make copies of these Customer Release Notes and the Quick Connect Guide

and distribute them to all users.

This document uses the term "Fiery" to refer to the Fiery Network Controller for

OTE

DocuColor 250/240. The term "copier" is used to refer to the DocuColor 250/240 copier.

Before printing to the Fiery, make sure system software version 1.0 is installed on the Fiery.

To determine this, print a copy of the Conﬁguration page from the copier Control Panel,

as follows:

1 Press the Machine Status button.

2 Touch the Billing Meter/Print Report tab on the touch screen.

3 Touch the Print Report/List option, and then the Network Controller Jobs Report option.

4 Select the System Setting List option.

5 Press the green Start button to print the Conﬁguration page.

You must also install user software version 1.0 onto client computers. For instructions,

see Printing from Windows and Printing from Mac OS .

User documentation available online

For user documentation in all supported languages, including the Customer User Addendum ,

see the following website:

http://services.efi.com/support/vfigs/9019710383/

System software installation

If you install system software from a client computer over the network, and the installation

fails because of connection timeout, exit any applications and disable any virus protection

software and any pop-up blocker on the client computer.

After installing or upgrading software

After upgrading or reinstalling your system software, you must reboot the Fiery.

Part Number: 45045321

10 June 2005