Xerox Nuvera 200 Manual de dicas e sugestões - Página 14

Procurar online ou descarregar pdf Manual de dicas e sugestões para Scanner Xerox Nuvera 200. Xerox Nuvera 200 18 páginas. Production system
Também para Xerox Nuvera 200: Ficha de dados (2 páginas), Modelo voluntário de acessibilidade dos produtos (12 páginas), Manual de dicas e sugestões (18 páginas), Manual de iniciação (30 páginas)

Release Issues

Xerox Nuvera

CQ#38117 Short Edge Feed 9x11 Stock

Description

9 x 11 stock cannot be loaded short edge first (SEF).

Workaround

Load an SEF-only stock such as Legal, run one or more sheets on that stock, then unload it and

put in 9x11 S

CQ#26871 Queue and Job based subsetting fails for Odd

number of pages duplex jobs

Description

Subset offset and finishing can be programmed on job in the job manager or on a Queue. This

works fine for simplex jobs. It will also work for duplex jobs as long as the request is for an

even number of images. But if the request is for a subset that would require a duplex page to

be split then the request fails.

Workaround

Only program even number of pages in the subset

CQ#47602 DS3500 finisher: a Job integrity issue may occur if

the unload button is pressed just before the first sheet is

delivered

Description

IF the user presses the DS3500 stacker unload button just before the first sheet of the job

reaches the stacker, there may be a jam in the flipping wheel area which could cause job

integrity issues.

Workaround

Please do not press the DS3500 stacker unload button just before receiving the first sheet of a

job

Description

If a Top Edge Sensor fault occurs and the machine is restarted with the IOT doors open, a non-

clearable Top Edge Sensor Fault may occur.

Workaround

Close the IOT doors and then Power-off/Power-on the machine and the fault will clear. To

avoid the occurrence, ensure the IOT doors are closed before restarting the machine.

3-4

Hints and Tips Guide