Xerox 850DP - Phaser Color Solid Ink Printer Manual do operador - Página 5

Procurar online ou descarregar pdf Manual do operador para Software Xerox 850DP - Phaser Color Solid Ink Printer. Xerox 850DP - Phaser Color Solid Ink Printer 16 páginas. Installation guide for accxes 10.2
Também para Xerox 850DP - Phaser Color Solid Ink Printer: Especificações (2 páginas), Manual suplementar (1 páginas), Manual suplementar (11 páginas), Manual de configuração (1 páginas), Manual de instruções de limpeza (9 páginas), Upgrade Manual (8 páginas), Manual suplementar (26 páginas), Nota de lançamento (33 páginas), Nota de lançamento (11 páginas), Nota de lançamento (11 páginas), Instruções de instalação (2 páginas)

Safety notes

The Stacker 1000 is designed and tested to meet strict

safety requirements. These requirements include safety

agency examination and approval and compliance to any

established environmental standards. Please read the following

instructions carefully before operating the stacker.

Note: In order to ensure safe operation of your stacker,

refer to the instructions, as needed, which are provided

in this operator manual.

Follow all the warnings and instructions which are marked on

or supplied with the product.

Unplug the stacker from the wall outlet before cleaning.

Always use materials which are supplied or approved by Xerox.

The use of other materials may result in poor performance and

could create a hazardous situation.

Do not use aerosol cleaners.

Never use supplies or cleaning materials for any purposes

other than what they were intended. Keep all supplies and

materials out of the reach of children.

Do not use the stacker near water, wet locations, or outdoors.

Stacker 1000 Operator Manual

Safety notes

This product is equipped with a three-wire, grounding-type

plug (in other words, a plug which has a third grounding pin).

This product also is equipped with an additional safety device.

The plug fits into a grounding-type power outlet only. This is a

safety feature. If you are unable to insert the plug into the

outlet, contact your electrician in order to avoid the risk of

electric shock and have the receptacle replaced. Never use a

ground adapter plug to connect the copier to a power source

receptacle which lacks a ground connection terminal.

This stacker must be operated from the type of power source

which is indicated on the marking label. If you are not sure of

the type of power available, consult your local power company.

If an extension cord is used with this stacker, ensure that the

total of the ampere ratings of any products plugged into the

extension cord does not exceed the extension cord ampere

rating. Also, ensure that the total amperage of all products

plugged into the wall outlet does not exceed the outlet

protection.

Do not install the stacker in a direct sunlit area, in a high

humidity or dusty environment, nor in a double-insulated room.