Xerox DocuPrint 115 Manual suplementar - Página 39

Procurar online ou descarregar pdf Manual suplementar para Software Xerox DocuPrint 115. Xerox DocuPrint 115 48 páginas. Tape client job submission guide enterprise printing system
Também para Xerox DocuPrint 115: Manual de operação (38 páginas), Especificações (2 páginas), Manual de operação (34 páginas), Manual de referência (2 páginas), Manual de Planeamento (20 páginas), Referência rápida (2 páginas)

Tape Client Job Submission Guide

Managing the Tape Client

This chapter describes the management tasks that you may

need to perform when using the Tape Client.

To access the windows from which you can operate and manage

the Tape Client, follow this procedure:

1. On the Print Services window, select Tape Client... from the

System menu. The Tape Client main window opens.

From this window, you can set up, start, and end LCDS jobs

on tape, as well as initiate all Tape Client management tasks.

2. Perform any necessary management or job setup tasks, or

start the job.

Before you can use the Tape Client to submit jobs to a printer,

make sure the Socket Gateway is configured and enabled.

(Refer to the online help for information on Socket Gateway

configuration and set up.) In addition, your printer must be set up

on the Tape Client windows. You may have more than one

printer connected to the Tape Client. (Refer to "Adding a printer,"

later in this chapter.)

Follow these steps to set up a printer for the Tape Client:

1. Open the Tape Client window. (Refer to "Accessing the Tape

Client," in the previous section.)

2. In the Output Control group box on the Tape Client window,

select the name of the printer that you want to set up.

3-1