Xerox WORKCENTRE C2424 Manual do utilizador - Página 40

Procurar online ou descarregar pdf Manual do utilizador para Software Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 43 páginas. Copier-printer
Também para Xerox WORKCENTRE C2424: Manual de referência rápida (14 páginas), Brochura (8 páginas), Manual suplementar (7 páginas), Especificações (6 páginas), Manual de iniciação (26 páginas), Manual do utilizador (21 páginas), Manual do utilizador (20 páginas), Manual de manutenção (20 páginas), Manual do utilizador (19 páginas), Manual de instruções (16 páginas), Manual (12 páginas), Manual de instruções (6 páginas), Manual de instalação (4 páginas), Manual de instalação (2 páginas), Substituição do kit de rolos de alimentação (2 páginas), Manual de configuração (2 páginas), Modelo voluntário de acessibilidade dos produtos (10 páginas), Comparação da concorrência (3 páginas), Manual de referência rápida (14 páginas), Manual de serviço (11 páginas), Manual de referência rápida (13 páginas)

Imprimir página

Xerox WORKCENTRE C2424 Manual do utilizador

Novell NetWare Troubleshooting Step-By-Step

These procedures eliminate cabling, communication, and connection problems associated with

network connected systems. The steps are divided into two groups:

■

Novell NetWare Hardware Step-by-Step

■

Novell NetWare Software Step-by-Step

Note

Novell NetWare Software Step-by-Step assumes that you are connected to a Novell

NetWare network with a Windows OS installed on the client workstation. When both of

these procedures are completed, print a test page from your software application. If the test

page prints, no further system troubleshooting is necessary.

Novell NetWare Hardware Step-By-Step

Note the LED activity on the system. The green link LED is ON whenever it is connected to an

active network. The amber traffic LED is flickering when data is being received.

Verify the following:

■

The cable connections: Use a new cable or connectors if possible

■

Which port your system is attached to. Connect a functioning network device to your

system to test the port.

Print the "Configuration Page" from your system.

Review the Connectivity Settings and verify these items:

■

NetWare is enabled.

■

Frame Type matches the frame type of the desired file server.

Note

To determine your NetWare IPX frame type, type config at the Novell console screen.

On large networks, using multiple IPX frame types, it is critical that the frame type be

set correctly.

■

PDL is set to your desired PDL (PostScript or PCL) or to Auto.

■

NDS Tree (for NetWare 4.x NDS and later) is set for the correct NDS tree name.

■

NDS Context (for NetWare 4.x NDS and later) is set for the correct NDS Context.

■

Print Server (PServer) Name is set for the name selected for the system to act as a

print server.

■

Novell Mode is correctly set.

If changes are made, reset the system. Once the system has been reset, allow

approximately two minutes for the system to go through a self test, then log onto the

network server.

Print out another copy of the "Configuration Page" to verify that the items you modified

were set and kept.

WorkCentre® C2424 Copier-Printer

6-40

Novell NetWare