Xerox DocuPrint 100MX Manual do utilizador - Página 21
Procurar online ou descarregar pdf Manual do utilizador para Servidor de impressão Xerox DocuPrint 100MX. Xerox DocuPrint 100MX 40 páginas. Freeflow print server micr user guide
Também para Xerox DocuPrint 100MX: Brochura (4 páginas), Especificações (2 páginas), Manual de instalação (2 páginas), Manual de Segurança (38 páginas), Manual do utilizador (32 páginas)
Imprimir página
Setting the font resolution
Setting the font resolution for the queue
MICR User Guide
Before printing MICR jobs, you must set the resolution
attribute appropriately for the queue to which you will be
sending the jobs.
The following table lists the different MICR font formats
and the resolution at which each font should be printed.
Font name and format
LCDS
PS
PCL
LCDS
PS
PCL
If your document contains scalable fonts or simple line art
generated at 600 dpi, the differences between printing at
300 or 600 dpi are subtle. However, if your document
contains bitmaps with a resolution of 600 dpi, printing at
300 dpi causes a degradation of image quality. To
preserve image quality, regenerate the bitmaps at 300 dpi.
Before sending a document to a print queue, you must
make sure that the resolution of the font used in the
document is the same as that specified for the queue.
If the font and queue resolutions do not match (for
example, a document with a 600 dpi font is sent to a 300
dpi queue), the font may print with subtle distortions and
could be rejected at the bank.
Follow this procedure to set the font resolution as a queue
property:
1. Click the Queue Manager icon on the DocuSP
window.
2. On the Queue Manager window, right-click the desired
queue name, and select Properties from the pop-up
menu.
MICR fonts
Required resolution
E13B
300 DPI
300 DPI and 600 DPI
300 and 600 DPI
CMC7
300 DPI
600 DPI
600 DPI
2-15