Xerox DocuPrint 75 MX Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Servidor de impressão Xerox DocuPrint 75 MX. Xerox DocuPrint 75 MX 32 páginas. Freeflow print server micr user guide
Também para Xerox DocuPrint 75 MX: Manual do utilizador (40 páginas)
![Xerox DocuPrint 75 MX Manual do utilizador](/uploads/products/server2/7042601/7042601.jpg)
MICR User Guide
Selecting PostScript fonts
To select a Xerox Postscript font, set the attributes for one of the
following:
•
Internal name: E13B
Point size: 9.12
•
Internal name: E13B9
Point size: 9
•
Internal name: CMC72510
Point size: 9.06
The Postscript E13B MICR font has the same character mappings
as the PCL fixed pitch E13B font. Refer to the Generic MICR
Fundamentals Guide for a complete listing of the character
mappings.
NOTE: The 300 dpi Type 3 PostScript font can be used in all
applications and queue resolution. In 600 dpi queueus and
applications, a slight change in corner rounding occurs with no
effect on readability or reject rate.
CAUTION: The 600 dpi Type 1 PostScript fonts can only be used
in 600 dpi queues with 600 dpi applications. Use of these fonts
with 300 dpi queueus or 300 dpi applications or resources cause
subtle distortions that degrade readability and are likely to cause a
high reject rate.
Selecting PCL fonts
The following HP PCL escape sequences are used to select the
Xerox PCL MICR fonts:
•
E13B 300 and 600 dpi font:
<ESC>(0U<ESC>(s0p8.00h9.00v0s0b0T
•
CMC7 600 dpi font (DP 100/115/135/155/180 EPS only):
<ESC>(1U<ESC>(s0p8h9.1v0s0b0T
Refer to the Generic MICR Fundamentals Guide for a complete
listing of the fixed pitch E13B and CMC7 MICR font characteristics
and character mappings. The character mappings relate the input
character to the printed character.
If both the 300 and 600 dpi E13B fonts have been loaded on the
printer, the font is selected based on the PCL Unit that was
specified. The default PCL Unit is 300.
11