Xerox Legacy 4110 Notas de lançamento do cliente - Página 2

Procurar online ou descarregar pdf Notas de lançamento do cliente para Servidor de impressão Xerox Legacy 4110. Xerox Legacy 4110 24 páginas. Server & controller solutions printing from mac os
Também para Xerox Legacy 4110: Manual para operadores (1 páginas), Instruções de funcionamento básico da copiadora (2 páginas), Manual para operadores (1 páginas), Notas de lançamento (1 páginas), Manual suplementar (1 páginas), Opções de impressão (24 páginas), Manual de impressão (24 páginas)

Xerox Legacy 4110 Notas de lançamento do cliente
Setup
Disabling Web Services
Disable Web Services by disabling port 80. Re-enable port 80 using the Control Panel display.
FTP Proxy Setup
To use the FTP Proxy service, you must first enable FTP Services.
Printing from Tray 5 (Bypass Tray) by default
To set a default for jobs to use the Bypass Tray, specify the tray at print time in the
printer driver.
WINS Address
The WINS Address does not appear in Configure in DHCP mode when you configure
Network Setup. Print a Configuration page to see the WINS Address.
LDAP Server Setup
If you enable an LDAP Server in Setup, you must meet the following requirements:
• Make sure the LDAP Server IP address and host name are registered on the DNS server
and that DNS Setup is enabled on the Fiery EXP4110.
• You must enable the Fiery EXP4110 e-mail service to allow LDAP to access corporate
e-mail addresses from Remote Scan.
• In a Windows Server 2003 Active Directory DNS environment, add the Fiery EXP4110
to the Windows Active Directory Domain. Otherwise, the LDAP feature might not be
able to resolve the LDAP Server name. To specify the Windows domain, use the option in
Network Setup.
• Make sure the time difference between the LDAP Server and the System Time of the
Fiery EXP4110 is 5 minutes or less.
For more information about Setup options, see Configuration and Setup and the WebTools
Configure Help.
Configure on Mac OS X
To use WebTools on Mac OS X, set the display resolution to 1280
Otherwise, some options in Configure might be hidden.
Member Printing (Printing Groups)
If Member Printing is enabled, you cannot download files to the Print queue from
Downloader, WebTools Print, or Command WorkStation, or using FTP Printing.
If Member Printing is enabled, do one of the following:
• Print directly from the application in which the file was created.
• Download the file to the Hold queue, change the owner information for the job with
Command WorkStation, and then send the job to print.
• Set the group name and password to the same values used to authenticate the FTP session,
and then print the job via FTP.
Page 2
x
1040 or higher.
Part Number: 45051581