Xerox Nuvera 100 Manual suplementar - Página 20

Procurar online ou descarregar pdf Manual suplementar para Servidor de impressão Xerox Nuvera 100. Xerox Nuvera 100 48 páginas. Production system
Também para Xerox Nuvera 100: Ficha de especificações (2 páginas), Características Manual (34 páginas), Manual de Planeamento (22 páginas), Manual do utilizador (40 páginas), Manual de operação (34 páginas), Manual de referência (2 páginas), Manual de Planeamento (20 páginas), Manual de referência (42 páginas), Referência rápida (2 páginas), Manual de instalação (2 páginas), Manual de Planeamento (38 páginas), Manual de Planeamento (16 páginas), Manual de referência (2 páginas), Especificações (2 páginas), Manual de dicas e sugestões (18 páginas), Manual de dicas e sugestões (18 páginas), Manual de iniciação (26 páginas), Manual de iniciação (30 páginas)

Tape Client overview

Functional overview

1-4

The Tape Client software enables transmission of data from a

cartridge or open reel tape to the DP EPS controller via the

Socket Gateway. Your Socket Gateway must be set up to

interact with the Tape Client software. (Refer to the online help

for information on Socket Gateway installation and set up.)

To interact with the Tape Client software, open the Tape Client

window on the controller user interface by selecting Tape

Client... from the System pull-down on the DocuSP Print

Services window. All Tape Client functions are accessed through

this window.

The Tape Client submits jobs to the controller through the Socket

Gateway. The data can be processed in streaming or spooling

mode, depending on the queue to which the tape job is sent.

On the controller, you can set up a print queue to be spooling or

streaming. (Click Help on the Queue Manager window for

instructions on setting up queues.) You specify the transmission

mode by selecting the appropriate type of queue.

•

Spooling queue: When you send a job to a spooling queue,

the entire job is received by the Gateway and written to the

controller disk before the job is printed.

•

Streaming queue: When you send a job to a streaming

queue, the DP EPS begins to print the job as soon as it

receives enough data to start; it does not wait until the entire

job has been received.

On the Tape Client window, you can monitor the status of the

tape processing while the tape is in use. Messages are displayed

in the Status field at the bottom of the window.

After the job has been sent to the DP EPS controller, you cannot

view information on it from the Tape Client window. You may

check job status on the Job Manager window at the controller.

(Click Help on the Job Manager window for information on

viewing and interpreting job status messages on the controller.)

Tape Client Job Submission Guide