Clarity C120 Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Amplificador Clarity C120. Clarity C120 19 páginas. Tv listener
Também para Clarity C120: Manual do utilizador (19 páginas)
Imprimir páginaIf the C120™ is producing no sound:
1. Ensure that proper installation and setup procedures were followed by
reading the user guide carefully.
2. Check to see if all the equipment is turned on, including the television
or VCR.
3. Look over all the cord connections (power, audio from television etc.),
making sure none have become loose or disconnected.
4. Ensure that the line of sight from the transmitter base to the headset
receiver is clear.
5. Check the battery in the C120™ Headset to see if it is fully charged.
6. Check to see if the infrared sensor on the base is facing the headset and
make sure the headset sensor is facing the base.
7. If the microphone is being used, try either turning up the television or
repositioning the microphone.
If the sound produced by the C120™ has static or is noisy:
1. If while in one mode (Stereo/Mono), static is experienced, switch the base
to the other mode.
2. Check the level of direct sunlight in the room. Too much direct sunlight
can cause interference.
3. Make sure the base is at the same height or above the level of the headset
when being worn.
Still Not Working?
If, after going through this checklist, the C120™ is still not functioning
properly, call Clarity at 1-800-426-3738.
12