Alderon Industries VersAlarm I/O VLIO-0001 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Sistema de segurança Alderon Industries VersAlarm I/O VLIO-0001. Alderon Industries VersAlarm I/O VLIO-0001 2 páginas. Indoor/outdoor alarm panel
Também para Alderon Industries VersAlarm I/O VLIO-0001: Manual do utilizador (20 páginas)
Imprimir página
Step 5: Install Bottom Cover
Line up the bottom enclosure cover with the grooves (5A), then slide
directly upward (5B) until it meets the top of the enclosure so the screw
hole is lined up and replace the screw at the bottom of enclosure.
5A
5B
Step 6: Power Alarm and Quick Test
After all wiring and installation steps have been completed, power
the alarm with incoming voltage, 120VAC. Use the features list and
diagram below to perform a quick test of the alarm to make sure it is
working properly.
Note: For complete wiring, installation instructions, or troubleshooting,
refer to the user guide for this model by scanning QR code.
1
4
3
8
5
Included with Product
▪ (1) VersAlarm™ I/O alarm panel
▪ (1) Wago connector
Customer Support
Online
alderonind.com
Email
QR Code
Scan code for full product details
Specifications
Primary Power:
Power:
Certifications:
Auxiliary Contacts:
Enclosure:
FCC Part 15: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: increase the separation between the equipment and receiver,
connect the equipment into an outlet on a circuit different from that to which the receiver is connected, consult the dealer or
an experienced radio/TV technician for help. Caution: changes / modifications not approved by Alderon Industries could void
the user's authority to operate the equipment.
VersAlarm
I/O - Features
™
1
2
2
3
4
5
6
7
8
9
7
6
9
120VAC, 50/60Hz
2.64 Watts maximum (alarm condition)
FCC Part 15 (US/Canada), CSA (US/Canada)
24VDC @ 0.5 Amps maximum
Outdoor, rated Type 3R
Power On Indicator - Green LED illuminates enclosure cover
Alarm Beacon - Red LEDs illuminate enclosure cover
Alarm Buzzer - Annunciates to indicate an alarm condition
Test/Silence Pushbutton - Activates alarm, silences alarm buzzer
Sensor Input - Terminals for sensor connection
Auxiliary Contacts - Interface with external device, 24VDC @ 0.5A maximum
Power Mains Input - Terminals for line (L1) and neutral (N), 120VAC
Power Indicator Turn Off - Flip switch down to turn off green power LED
QR Code - Scan code for additional product information (alderonind.com)