Alderon Industries VLIO-00004 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança Alderon Industries VLIO-00004. Alderon Industries VLIO-00004 20 páginas. Indoor/outdoor alarm panel

Alderon Industries VLIO-00004 Manual do utilizador

Features

Refer to the illustration below to reference the feature descriptions provided.
10
(1) Power On Indicator - A pair of green LEDs will illuminate inside
the top cover of the enclosure to indicate that the unit is powered on.
(2) Alarm Beacon - During an alarm condition, the green power on
indicator will turn off and the red alarm LEDs will illuminate, flashing
inside the top cover of the enclosure.
(3) Alarm Buzzer - The alarm buzzer will annunciate in addition to
the visual indication provided by the red LEDs inside the top cover of
the enclosure during an alarm condition.
(4) Test/Silence Pushbutton - This button may be used to either
test or silence the alarm. If the alarm is not in the state of an alarm
condition, the button will test the alarm activating the alarm beacon
and buzzer. During an alarm condition, it will silence the buzzer and
the red LEDs will stop flashing and remain solid.
(5) Auxiliary Contacts - One set of auxiliary contact terminals are
included allowing the alarm to interface with an external device. The
contacts are rated for 24VDC @ 0.5A maximum.
(6) Sensor Input - One set of sensor terminals are included that can
be used to connect a variety of sensors.
1
4
8
3
5
VersAlarm™ I/O - USER GUIDE
(7) Power Mains Input - The alarm has terminals for the line (L1/L2)
connection wires to install 230VAC power from the mains. If 120VAC
power is needed, visit alderonind.com or call factory for options.
(8) Power Indicator Turn Off - Hold down the test/silence push-
button for 15 seconds to turn off the green power indicator. Repeat
process to turn power indicator back on.
(9) QR Code - Scan code which directs you to alderonind.com where
additional information can be found for the VersAlarm™ I/O.
(10) Sound Chamber - The enclosure is designed to allow maximum
sound output from the alarm buzzer. This chamber prevents water
from getting into the enclosure while letting the sound out.
Alderon Industries™ - Leading Edge Control Products | 5
2
7
6
9