Yamaha AW2400 Manual - Página 14

Procurar online ou descarregar pdf Manual para Instrumento musical Yamaha AW2400. Yamaha AW2400 30 páginas. Professional audio workstation
Também para Yamaha AW2400: Brochura e especificações (6 páginas)

Imprimir página

Punch In/Out

If you make a mistake while recording, you can punch-in at the spot that

the mistake was made. To punch-in simply means to start recording again at the

point where the mistake was made. To perform a punch-in, first rewind the

AW2400 to a few seconds before the mistake. Next, press the [PLAY] key in the

transport section and when you get to the point where the mistake was made

simultaneously press the [PLAY] and [REC] keys and record over the mistake.

If the mistake is only a short one and you just need to fix the mistake and

not erase the rest of the track you can first punch-in at the point where the

mistake was and then punch-out when you have fixed the mistake. To perform a

punch-out, first punch-in at the point where the mistake was made then press the

[PLAY] key by itself to 'punch-out' of recording after you have fixed the mistake.

Overdubbing

After you have successfully recorded the first track or tracks, you

can then record additional tracks while listening to your previously recorded

tracks. This is referred to as 'overdubbing' tracks.

Before you begin overdubbing you must disengage the previously

recorded tracks from being record-enabled. If you don't, you will erase the tracks

that you just recorded.