Yamaha AW4416 Suplemento ao manual - Página 15
Procurar online ou descarregar pdf Suplemento ao manual para Instrumento musical Yamaha AW4416. Yamaha AW4416 48 páginas. Installing an internal hard disk
Também para Yamaha AW4416: Manual de Suplementos (1 páginas), Tutorial (34 páginas), Manual de Suplementos (20 páginas), Manual (3 páginas)
Imprimir página
6
Operate faders 1–16/[ON] keys 1–16.
The MIDI messages assigned to the correspond-
ing fader/[ON] key will be transmitted from the
MIDI OUT/THRU connector.
Tip!
• Even when the REMOTE screen is displayed, the
function of the faders and [ON] keys of the stereo
output channel will not change.
• The Remote A/Remote B fader positions and [ON]
key on/off status can be saved in a scene.
• Fader and [ON] key operations can also be recorded
in automix. By using automix to record operations
separately in each page, you can perform up to 32
channels of fader/[ON] key operations.
Assigning a MIDI message to a
fader
The MIDI Remote function lets you assign a MIDI
message of up to 16 bytes to each fader/each [ON]
key.
A message can be assigned in one of two ways. You
can input the desired message manually, one byte at a
time. Or you can capture a MIDI message received
from the MIDI IN connector/TO HOST connector/
option slot, and assign it either without change or
after editing it.
Here we will explain how to transmit a modulation
wheel message (control change #1) from a synthesizer
to the AW4416, and assign it to a desired fader.
1
Connect the MIDI OUT/THRU connector of
the AW4416 to the MIDI IN connector of
your synthesizer, and the MIDI IN connec-
tor of the AW4416 to the MIDI OUT con-
nector of your synthesizer.
MIDI IN
PROFESSIONAL AUDIO WORKSTATION
connector
AW4416
MIDI OUT/THRU
connector
MIDI OUT
connector
MIDI IN
MIDI keyboard
connector
Version 2.0 Manual Supplement
• In the MIDI Setup 1 page, make sure that the ECHO
button in the CONTROL CHANGE area is turned
off. If the ECHO button is turned on, control
changes received from the external device will be
re-transmitted back to the external device, causing
malfunctions.
• In the MIDI Setup 2 page, make sure that the MIDI
OUT/THRU switch is set to OUT.
• The TX, RX, and OMNI buttons in the CONTROL
CHANGE area of the MIDI Setup 1 page will not
affect MIDI Remote operations.
2
Press the [MIDI] key.
3
Hold down the [SHIFT] key and press the
[F1] key to access the REMOTE screen.
4
Press one of the [F1]–[F4] keys to display
the fader/[ON] key to which you want to
assign a MIDI message.
The Remote A 1-8 page is selected in this exam-
ple.
1
2
3
A
MIDI message assigned to the [ON] key
B
MIDI message assigned to the fader
C
Currently selected channel number
5
Press the [SEL] key for the channel to
which you want to assign a MIDI message.
Areas 1 and 2 will show the MIDI messages
that are assigned to the fader and [ON] key of
that channel.
15