Yamaha Disklavier Mark III series DGC1B Manual de operações avançadas - Página 17
Procurar online ou descarregar pdf Manual de operações avançadas para Instrumento musical Yamaha Disklavier Mark III series DGC1B. Yamaha Disklavier Mark III series DGC1B 39 páginas. Dgc1b
Imprimir página
Chapter 3
Timer Play
You can program your Disklavier to play back groups of disks at various specified times. All you need to
do is register up to a maximum of 99 timer settings, and your Disklavier will perform them unattended.
This function is called Timer Play.
The "Timer Play Examples" section provides some examples of programmed playback.
Important: The Control Unit must be turned on in advance in order for Timer Play to function. Timer Play cannot
turn on/off the Control Unit.
Note: Prolonged playback may cause your piano to overheat. Insert sufficient breaks between continuous song
playback.
Creating a Program
This section takes you through the steps for
creating a Timer Play program. Understanding the
parameters of Timer Play will enable you to create
music programs suited to your needs.
1
Hold down [FUNC.] and press
[STANDBY / ON].
The setup menu appears.
2
Press [>] until the c cursor is next
to the Timer Play option and press
[ENTER].
The following display appears.
3
4
The five parameters on the lower row
constitute a program. You can create up to
99 programs.
1
2
5
6
7
Item
Option
Description
1) Timer
ON, OFF Enables Timer Play.
switch
2) Sort
Pressing [ENTER] sorts the
programs in chronological
order.
3) Program
01 - 99
Indicates the number of a
number
program. Only program
numbers with programs are
displayed.
4) 5) Time
24-hour
Indicates the time at which a
format
function is to be performed.
##:## temporarily sets the
same time as the previous
program.
6) Function
- - - -,
The function to be performed
PLAY,
at the specified time. - - - -
omits the program.
STOP
7) Grp
#### means no particular song
####,
selection
Grp1 - 9
is specified; the previous
program's selection is valid.
The difference between
selecting the same group
number as the previous
program and selecting #### is
that, in the former, playback
begins at the beginning of the
group, and in the latter,
playback begins with the song
that is selected when that
program is enabled.
13