Yamaha DTX500 Manual do Proprietário - Página 24

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha DTX500. Yamaha DTX500 48 páginas. Drum trigger module

Imprimir página

Record Your Performance

In this section, you'll learn how to record your performance to the DTX500's built-in sequencer.

In the song data you record, you can switch Drum Kits, change the tempo and playback in the

same way as with Preset Songs.

Recording System

• Recording can be done with any of the User Songs (64–83).

However, you cannot record to Preset Songs (1–63).

• A recorded song doesn't contain recordings of the audio

'sounds' of the drums, but rather the performance 'informa-

tion' or data of precisely when and how each pad was hit. This

information is called sequence data. Unlike audio data,

sequence data can be freely used to change the tempo, select

the voice or drum kit during playback.

Now, let's start recording...

Select the Song you want to record

Press the [SONG] button to display the Song Select display,

select a User Song number (64–83).

If you want to play along with a Preset Song and record it,

select the desired song (1–63). In this case, the lowest num-

bered empty User Song will automatically be selected for

recording.

NOTICE

• If a User Song containing data is selected, any recorded

data previously existing is overwritten and lost.

Set the Recording Conditions

Simultaneously hold down the [SHIFT] button and press the

■

[SONG

] button to call up the following Recording Con-

ditions setting page.

* If a Preset Song is selected for recording and all User Songs

already contain data, the error message "Memory full" is

shown. Use the Song Clear function (p. 25) to prepare an

empty User Song, then set the recording conditions.

In this display set the click tempo, beat, and quantize.

Press the [

]/[

] buttons to move the ﬂashing cursor to the

item you want to set, then rotate the jog dial to set its value.

DTX500 Owner's Manual

Tempo

REC~~~~~~~~⁄=130

Beat=4~Quant=⁄3

Beat

Quantize

• Tempo [Range] 30 to 300

Sets the click's tempo (

• Beat [Range] 1 to 9

Sets the click's beat when recording.

⁄

⁄3

• Quantize [Range]

note triplet),

(sixteenth note),

let),

The Quantize function can be applied during recording

and is used to align the timing of your performance with

that of the nearest speciﬁed beat. The accuracy of quanti-

zation is assigned with a note value.

* A setting of "no" results in no quantization.

● How Quantize Works (an example)

Recorded notes were not played in time.

The Quantize Function aligns the timing.

Perfect timing

Start Recording

■

Press the [SONG

] button and after the count, recording

will start. Record while listening to the click sound.

Current measure number during recording

REC~~Meas=~10

~Now~Recording.

NOTICE

• Never attempt to turn off the power during recording. All

User Song data may be lost.

=) when recording.

Ö3

(eighth note),

(eighth

Ü3

(sixteenth note trip-