Yamaha Silent SLG130NW Manual do Proprietário - Página 12
Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha Silent SLG130NW. Yamaha Silent SLG130NW 14 páginas. Silent guitar
Também para Yamaha Silent SLG130NW: Manual do Proprietário (15 páginas)
Imprimir página
■ . Using.the.LINE.OUT.jack.
1.
Use a standard phone plug cable to connect the Silent Guitar's LINE OUT jack to the input jack on the
guitar amplifier or powered speaker, etc.
When the cable's plug is inserted into the LINE OUT jack, power will be supplied to the Silent Guitar
and the power lamp will light.
•. Before. making. any. connections,. make. sure. that. the. output. volume. on. the. guitar. amplifier. or. pow-
ered.speaker,.etc.,.is.turned.down.or.its.power.is.switched.OFF.
•. When.the.guitar.is.not.being.used,.disconnect.the.cable's.plug.to.save.battery.
2.
Rotate the VOLUME knob while playing, and adjust the volume to a suitable level.
•. If.the.sound.is.distorted.when.playing.vigorously,.turn.the.VOLUME.knob.slightly.to.the.left.
3.
Rotate the BASS and TREBLE control knobs to adjust the sound quality.
Rotate the BASS knob to the right to increase the low frequencies, and to the left to decrease the low
frequencies.
Rotate the TREBLE knob to the right to increase the high frequencies, and to the left to decrease the
high frequencies.
4.
You can add different effects to the guitar's tone using the EFFECT function.
OFF .................Disengages the effect function. Only the original non-processed guitar sound is heard.
REV1 ...............Adds reverb similar to what you would normally experience in a room.
REV2 ...............Adds reverb similar to what you would normally experience in a hall.
CHORUS.........The chorus effect makes it sound as if two guitars are being played.
ECHO ..............Adds an echo effect to the guitar's sound.
•. Power.consumption.is.slightly.lower.when.the.EFFECT.switch.is.set.to.the."OFF".position.compared.
to.the.other.EFFECT.setting.positions.
•. Noise.may.be.produced.when.changing.the.setting.with.the.EFFECT.switch.
•. A.time.lag.may.occur.when.switching.to.another.effect.causing.a.delay.until.the.next.effect.is.produced.
When the power is
ON, the lamp lights.
CHORUS
■ . Using.the.stereo.earphones.
When using the instrument with the supplied stereo earphones or a separately purchased pair of
headphones, or when you want to send the instrument's stereo output to an external device, use
the headphones (PHONES) jack for connecting the earphones or external device.
1.
Set the headphones ON/OFF switch, located on the right side of the control panel, to its "ON" position
to supply power to the Silent Guitar. The power lamp will light.
•. When.using.the.LINE.OUT.jack,.audio.output.is.delivered.to.the.headphones.jack.regardless.of.the.
headphones.ON/OFF.switch.position.
12
Using the Controls
(Using.with.a.guitar.amplifier.or.powered.speaker,.etc.)
Selects
Adjusts the
the effect.
volume
OFF
REV1
ECHO
REV2
EFFECT
VOLUME
Adjusts low
frequencies
BASS
TREBLE
(or.stereo.output.to.an.external.device)
Adjusts high
frequencies
OFF ON
PHONES