Yamaha System65 Manual do Proprietário

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha System65. Yamaha System65 5 páginas. Acoustic electric guitar

Imprimir página

Acoustic Electric Guitar

System65

Owner's Manual

Thank you for choosing a Yamaha electric-acoustic guitar.

In order to make the most of the advanced features and performance provided by your

guitar, please read this manual carefully before using the instrument.

Note that this manual covers only the electronic parts of this product. For information on

the other non-electronic parts, refer to the separate Acoustic Guitar Owner's Manual.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury

or even death from electrical shock, short-circuiting, damages, ﬁre or other hazards. These

precautions include, but are not limited to, the following:

Do not open

• This instrument contains no user-serviceable parts. Do not open the instrument or attempt to

disassemble or modify the internal components in any way. If it should appear to be malfunction-

ing, discontinue use immediately and have it inspected by qualified Yamaha service personnel.

Water warning

• Do not expose the instrument to rain, use it near water or in damp or wet conditions, place it on any

containers (such as vases, bottles, or glasses) containing liquids that might spill into any openings. If

any liquid such as water seeps into the instrument, turn off the power immediately and have the instru-

ment inspected by qualified Yamaha service personnel.

If you notice any abnormality

• When one of the following problems occur, immediately turn off the power and remove all batteries

from the instrument, then have the instrument inspected by Yamaha service personnel.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to

you or others, or damage to the instrument or other property. These precautions include, but are

not limited to, the following:

Connection

• Before connecting the instrument to other electronic components, turn off the power for all components.

Before turning the power on or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and gradually raise the

volume controls while playing the instrument to set the desired listening level.

Location

• Do not place the instrument in an unstable position where it might accidentally fall over.

Handling caution

• Do not rest your weight on, or place heavy objects on the instrument, and do not use exces-

sive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a high or uncom-

fortable volume level, since this can cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

* Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations

to the instrument, or data that is lost or destroyed.

* Information on the battery can be found in the section at the end of this sheet.

* Please read the instruction manual for the external audio device such as a guitar ampli-

ﬁer, etc., prior to use.

BATTERY REPLACEMENT

As battery power becomes low, the battery check indicator will light. Replace the batteries

as soon as possible.

q Press the release lever on the battery case in the di-

rection indicated by the arrow

order to unlock it, and then slide out the battery holder.

w Remove the old batteries from the battery holder, and

insert the two new size AA alkaline batteries. Make

sure that the poles on the batteries are properly posi-

tioned as shown in the diagram inside of the holder.

e Slide the battery holder back into the battery case and

press firmly so that the battery holder locks in place.

WW33981 版次 R4

Battery Holder

in the illustration in

Release Lever

The built-in preampliﬁer is automatically turned ON when a guitar cable is

connected to the output jack. The tuner can be turned on or off anytime.

q VOL Control

Controls the volume. Turning the knob fully counterclockwise sets the volume to zero.

* Always set the volume to zero when connecting or disconnecting the cable.

w BATT. (Battery Check) Indicator

This indicator will light when the battery needs to be replaced. Please replace the bat-

tery as soon as possible when the BATT. indicator lights.

* The battery check indicator may light momentarily when the TUNER switch is

pressed. This is not a sign however, that the battery power is low.

e 3-Band Equalizer

The knob positions in the figure show the flat level setting. Turn clockwise to boost, or

counter clockwise to cut.

LOW : Boosts or cuts the level of the low frequencies.

MID : Boosts or cuts the level of the middle frequencies. The AMF control r adjusts

the center frequency of the band affected by this control.

HIGH : Boosts or cuts the level of the high frequencies.

r AMF (Adjustable Mid Frequency) Control

Sets the center frequency of the band of frequencies affected by the MID equalizer

control. The range is from 80 Hz to 10 kHz.

t Tuner Display

Displays tuner information.

y TUNER Switch

Switches the tuner ON/OFF.

q Press and hold the TUNER switch until the

power ON.

w Tune the guitar string until the note name of the desired pitch appears in the display.

e The string is in tune when only the

Pitch is low

r Press the TUNER switch again to switch the tuner power OFF. Also, if the note name is not

shown in the display for more than 1 minute, the power will automatically switch OFF.

(

display goes off)

* It may take a few seconds before the tuner can detect pitches after being switched ON.

* The note name and

pitch changes. Gradually change the pitch and check when tuning.

* The tuner may not be able to detect notes rich with overtones or with very short sustain.

* Sound output is not muted when the tuner is being used.

Alkaline

battery x2

l System:

System65

Vol., 3-Band EQ (HIGH, MID, LOW), AMF control, TUNER

pin/power switch

l Battery Life:

due to operating conditions.)

range +/– 3 cents

* The contents of this manual apply to the latest specifications as of the publishing date.

To obtain the latest manual, access the Yamaha website then download the manual file.

NOMENCLATURE/THE CONTROLS

Battery Holder

Control Section

Pickup Section

USING THE TUNER

lamp lights in the center of the

In Tune

displays may have difficulty keeping up with irregular

SPECIFICATIONS

l Pickup:

Bar Sensor (Piezo type)

l Output Jack:

l Output Impedance:

l Batteries:

1kΩ

Approx. 180 hours (Without tuner and using alkaline batteries. May differ

l Tuner:

Chromatic type (12 semi-tones), A4=440Hz, Accuracy

l Accessories:

Neck adjustment hex-wrench x 1

Output Jack

(with power switch function)

display lights to switch the tuner

display.

Pitch is high

l Preamplifier Controls:

Combination end

Size AA alkaline battery (LR6)