Yamaha Vintage DX7 Special Edition ROM Manual de instalação - Página 3

Procurar online ou descarregar pdf Manual de instalação para Instrumento musical Yamaha Vintage DX7 Special Edition ROM. Yamaha Vintage DX7 Special Edition ROM 7 páginas. Digital programmable algorithm synthesizer
Também para Yamaha Vintage DX7 Special Edition ROM: Notas de desempenho (8 páginas), Manual de instruções (34 páginas), Manual do Proprietário (35 páginas), Manual de serviço (17 páginas), Manual de instruções (43 páginas)

Imprimir página

Yamaha Vintage DX7 Special Edition ROM Manual de instalação

(Re)Move the Keybed & Remove the Keyboard Rail

It can be difficult to see the delicate pins when installing the SuperMAX+ board. By moving the

keybed (the chassis with the keys) and removing the silver keyboard rail, you will have better

sight lines and freedom of movement when installing the SuperMAX+ board.

Remove the 4 large external screws from the underside of the keyboard along the front

edge. The photo below shows the inside front edge of the empty case bottom. The photo

illustrates the location of the 4 screws. You will, of course, be unscrewing from the underside.

Loosen the 3 internal screws at the extreme right and left ends that hold the keybed in

place. It is not necessary to extract them from the holes they reside in.

Carefully lift the keybed slightly up and out (toward yourself) an inch or so.. You don't need

to move it much. You will probably need to free up one or more cables to accomplish it. Or if you

prefer, disconnect the cables and completely remove the keybed.

This will give you access to the 3 screws holding the silver keyboard rail in place. Remove those

three screws and set aside the silver keyboard rail. (Shown below with keybed removed).

DX7 SuperMAX+

Page 3 of 7

Install