Yamaha WX5 Manual do Proprietário - Página 25

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha WX5. Yamaha WX5 44 páginas. Yamaha wind midi controller owner's manual

Imprimir página

Wind & Lip Sensor Adjustment

Perform the sensor adjustments after selecting the required playing mode (page 10).

Wind Zero & Wind Gain Adjustment

Adjust both Wind Zero and Wind Gain to set the ideal

relationship between wind pressure input and MIDI data

output for your playing style.

• Wind Gain

Sets the sensitivity to breath pressure.

• Wind Zero

Sets the minimum amount of breath pressure which must

be applied before sound is produced.

WIND GAIN

WIND ZERO

LIP GAIN

LIP ZERO

Vel

Trns

Win

Fing

Win

LIP

Fast

LIP

Hi ct

LIP

Whl

LIP+

Before adjusting the wind gain and wind zero, be sure

to check the type of MIDI data which is being transmit-

ted by the WX5 in response to breath input, and make

sure that your tone generator is set up to receive that type

of data (page 22). For example, if the WX5 is set to trans-

mit Breath Controller data (control change #02) but the

tone generator is not set up to receive Breath Controller

data, the wind sensor cannot be adjusted. Adjusting the

wind gain and wind zero parameter is equivalent to se-

lecting the ideal mouthpiece and reed for an acoustic wind

instrument, so be sure to make these adjustments care-

fully.

Adjustment Procedure

Select a voice which is responsive to breath control,

and apply breath pressure to the WX5. For this adjust-

ment it is better to select a sustained (non-decaying)

type of voice such as organ, rather than a decaying

voice like piano.

Wind Gain

Breath Pressure

Wind Zero

Using a small screwdriver, rotate the WIND ZERO

control clockwise until LED 2 lights and the note be-

gins to sound (page 11).

• If no sound is produced, check your connections and

MIDI channel settings.

When the note begins to sound, rotate the WIND

ZERO control counterclockwise just until LED 2 goes

out and the sound stops.

Applying only the minimum amount of breath pres-

sure you want to produce sound output, repeat steps 2

and 3, above, until set as required.

Using a small screwdriver, adjust the WIND GAIN

control for optimum sensitivity while applying breath

pressure to the WX5. Rotating the control clockwise

increases sensitivity.

The WIND ZERO setting may change slightly when

WING GAIN is adjusted, so you may have to repeat

the WIND ZERO and WIND GAIN adjustments a few

times to get everything exactly right.