Yamaha YDP-151 Manual do Proprietário - Página 36

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha YDP-151. Yamaha YDP-151 50 páginas. Yamaha ydp-131: quick start
Também para Yamaha YDP-151: Manual do Proprietário (49 páginas), Manual de operação rápida (2 páginas)

Imprimir página

Set the voltage selector and connect the

power cord.

127

240

Voltage Selector

Before connecting the AC power cord, check the setting

of the voltage selector which is provided in some areas.

To set the selector for 110V, 127V, 220V or 240V main

voltages, use a "minus" screwdriver to rotate the selector

dial so that the correct voltage for your region appears

next to the pointer on the panel. The voltage selector is

set at 240V when the unit is initially shipped. After the

proper voltage has been selected, connect the AC power

cord to the AC INLET and an AC wall outlet. A plug

adaptor may be also provided in some areas to match the

pin conﬁguration of the AC wall outlets in your area.

After completing the assembly, please

check the following.

• Are there any parts left over?

➝ Review the assembly procedure and correct any

errors.

• Is this instrument clear of doors and other mov-

able ﬁxtures?

➝ Move the instrument to an appropriate location.

• Does this instrument make a rattling noise

when you shake it?

➝ Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

➝ Turn the adjuster so that it is set ﬁrmly against

the ﬂoor.

• Are the pedal and power cords inserted securely

into the sockets?

➝ Check the connection.

• If the main unit creaks or is otherwise unsteady

when you play on the keyboard, refer to the

assembly diagrams and retighten all screws.

Keyboard Stand Assembly

YDP-151/YDP-323

WARNING

An improper voltage setting can cause serious

damage to this instrument or result in improper

operation.

Set the adjuster.

Rotate the adjuster until it comes in ﬁrm contact with the

ﬂoor surface.

Attach the headphone hanger.

Use the included two screws 5 (4x10mm) to

attach the hanger as shown in the illustration

below.

When moving the instrument after assembly, always

hold the bottom of the main unit.

CAUTION

Do not hold the key cover or top portion. Improper

handling can result in damage to the instrument or

personal injury.

Key cover

Do not

Hold here.

hold here.

Top portion

Do not hold here.