Yamaha YDS-150 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha YDS-150. Yamaha YDS-150 25 páginas. Digital saxophone

Imprimir página

Turning on the Power / Setting to Standby

Press the [

] (Standby/On) button to turn the

power on.

The power lamp (

) is lit in red when the power is on.

Adjust the volume as desired while blowing into the

mouthpiece.

CAUTION

• Do not use the instrument or headphones for a

long period of time at a high or uncomfortable

volume level, since this can cause permanent

hearing loss.

NOTICE

• While turning on the power, do not attempt any other

operations, such as blowing into the mouthpiece. Doing

so may cause the instrument to malfunction.

Press and hold the [

longer than one second to enable standby mode.

CAUTION

• Even when in standby mode, an electric current

is still flowing in the instrument at the minimum

level. When you are not using the instrument for

a long time, make sure to disconnect the USB

power adaptor from the AC outlet, or remove the

batteries from the instrument.

NOTE

• If over 5 seconds elapses with no keys or buttons oper-

ated since the power was turned on, the LED display

turns off. Simply operate any button or move the instru-

ment to turn the LED display on again.

Enabling / Disabling Auto Power Off

To prevent unnecessary power consumption, this instru-

ment features an Auto Power Off function that automati-

cally turns the power off if the instrument is not operated

for a specified period of time (30 minutes). By default, it is

set to On; however, this setting can be changed with the

[Fn] button.

] (Standby/On) button for

NOTICE

• If your instrument is connected to other equipment such

as amplifiers and speakers but you do not intend to use

it for 30 minutes, we recommend that you turn off all

devices as described in the corresponding owner's

manuals. Doing so eliminates the risk of damage to the

other equipment. If you do not want the instrument to

turn off automatically when connected to other equip-

ment, disable the Auto Power Off function.

Adjusting the Instrument Volume

Adjust the volume.

The volume is increased by 1 each time VOL [+] is

pressed. The volume is decreased by 1 each time VOL [-]

is pressed. You can adjust the volume in a range of 0 to 15,

od. The default value is 13.

* The "od" (overdrive) setting is the maximum volume, for the

most powerful sound. Keep in mind that there may be dis-

tortion in the sound for specific Voices and in the lower

ranges.

Initialization

Perform this operation when you want to reset all settings

to their factory defaults.

If the power is on, turn the power off.

Turn the power on while holding keys [1], [p], and

[3].

YDS-150 Owner's Manual