Yamaha YM-460F Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Instrumento musical Yamaha YM-460F. Yamaha YM-460F 19 páginas. Concert marimbas
Também para Yamaha YM-460F: Manual do Proprietário (20 páginas)

Imprimir página

Insert the rails (1) and (4) into the frame ends of the legs.

4-1. Insert the outer rails (1) and (4) in the same way as the inner rails (2) and (3).

A mark "A" is printed on the large end face of the rail (1) and the groove section of the frame end of

the large end leg, and a mark "D" for the rail (4).

Set the tone bars.

5-1. While adjusting the long frame, engage the rail clamp on rail (2) and rail (3) with rail (1) and rail (4),

respectively.

Rail clamp

Rail (4)

5-2. Set the natural tone bars first.

Align each tone bar individually and hook its

After confirming that the cord is secured to every tone bar post, fix the tone bars by pulling the right

and left cords forward from the large end side and hooking the two springs into each other.

* When setting the tone bars, use care not to cause any damage to them.

Rail (2)

Small end

Suspension cord

YM-460/460F/410/410F/46/41

Rail (1)

Rail clamp

Rail (3)

onto the corresponding tone bar post.

Large end

ASSEMBLY

Suspension cord

Springs