Setting Up
Adjusting the Master Volume
To adjust the volume of the entire keyboard sound,
use the [MASTER VOLUME] dial while playing the
keyboard.
CAUTION
• Do not use the instrument for a long period of time at a
high or uncomfortable volume level, since this can cause
permanent hearing loss.
Connecting Headphones or
External Speaker
Standard stereo
phone plug
Connect a pair of headphones to the [PHONES/
OUTPUT] jack. This jack also functions as an exter-
nal output. By connecting to a computer, keyboard
amplifier, recorder, or other audio device, you can
output the audio signal of this instrument to that
external device. The speakers of this instrument are
automatically shut off when a plug is inserted into
this jack.
CAUTION
• Do not use the instrument or headphones for a long period
of time at a high or uncomfortable volume level, since this
can cause permanent hearing loss.
• Before connecting the instrument to other electronic com-
ponents, turn off the power of all the components. Also,
before turning any components on or off, make sure to set
all volume levels to minimum. Otherwise, damage to the
components or electrical shock may occur.
NOTICE
• To avoid possible damage to the external device, first turn
on the power to the instrument, then to the external
device. When turning off the power, do so in reverse order:
first turn off the power to the external device, then to the
instrument.
14
PSR-E263 YPT-260 Owner's Manual
Using a Pedal (Sustain)
You can produce a natural sustain as you play by
pressing a footswitch (FC5 or FC4A; sold separately)
plugged into the [SUSTAIN] jack.
NOTE
• Plug or unplug the footswitch while the power is off. Also, do
not press the footswitch when turning the power on. Doing so
changes the polarity of the footswitch, resulting in reversed
operation.
• The sustain function does not affect style (automatic accom-
paniment; page 18).
Using the music rest
Insert the music rest into the slots as shown.
Imprimir página