CALI alumLEDs ALS500T-DBR-TB Manual de instruções de instalação - Página 8
Procurar online ou descarregar pdf Manual de instruções de instalação para Luminária CALI alumLEDs ALS500T-DBR-TB. CALI alumLEDs ALS500T-DBR-TB 11 páginas.
Imprimir página1
Measure installation area to determine required lengths of Ceiling Trim.
Example: 16' required two 8' sections of Ceiling Trim.
4'
4'
2
Measure and cut a 2' section from one of the Ceiling Trim segments.
2'
3
Install Trim Retention Springs to ceiling trim. Use one clip per 2', or two clips
per segment under 4'. Install clips 4" from each edge, evenly spaced.
CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | [email protected] | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
16'
4'
Cut Line
8'
Trim Retention Spring
ALS500T-DBR-TB
4
Install Ceiling Trim with Trim Retention Springs to mounted luminaires.
Ensure all springs snap into channel and that trim is not loose or sagging.
Note: Place trim pieces carefully, they can not be removed after installing.
Note: Ensure placement Trim Retention Springs is at least 4" from edges of
4'
luminaire where wiring is present.
4'
2'
INSTALLATION INSTRUCTIONS
Keep Trim Retention Springs
4" from this edge
16'
4'
4'
Ceiling Trim
Trim Retention Spring
8'
Seams between trim and fixtures not aligned
Installing Ceiling Trim
4'
6'
1 / 29 / 2021 / Rev 2
Page 8 of 11