Yamaha PSR-E243 Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Teclado eletrónico Yamaha PSR-E243. Yamaha PSR-E243 45 páginas. Owner's manual
Também para Yamaha PSR-E243: Referência (3 páginas), Manual do Proprietário (44 páginas), Manual do Proprietário (44 páginas), Manual do Proprietário (44 páginas)
Imprimir página
PL EA SE REA D CA REFU L LY B EFORE PROCEEDI N G
WA RN I N G
Power supply/AC power adaptor
Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
O nly use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use the specified adaptor (page 38) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
Do not open
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Y amaha service personnel.
Water warning
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Y amaha service personnel.
Never insert or remove an electric plug with wet hands.
Fire warning
Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
CA U T I ON
Power supply/AC power adaptor
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
W hen removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
R emove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
PRECA U T I ON S
Battery
Follow the precautions below . Failure to do so might result in explosion, fire,
overheating or battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be charged.
- Keep the batteries separate from metallic objects such as necklaces, hairpins,
coins, and keys.
- Use the specified battery type (page 10) only.
- Use new batteries, all of which are the same type, same model, and made by
the same manufacturer.
- Always make sure all batteries are inserted in conformity with the +/- polarity
markings.
- W hen the batteries run out, or if the instrument is not to be used for a long
time, remove the batteries from the instrument.
- W hen using Ni-MH batteries, follow the instructions that came with the
batteries. Use only the specified charger device when charging.
Keep batteries away from small children who might accidentally swallow them.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid
should come in contact with your eyes, mouth, or skin, wash immediately with
water and consult a doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
If you notice any abnormality
W hen one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. (If you are using batteries,
remove all batteries from the instrument.) Then have the device inspected by
Y amaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
Location
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.