Playing an External Audio Device with
the Built-in Speakers
You can output the sound of an external audio device, such as a portable music player,
with the built-in speakers of this instrument by connecting it via a cable. This lets you
play the keyboard along with playback of your music player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment's [AUX IN] jack.
Use an audio cable with no resistance having a
stereo-mini plug on one side for connecting to
this instrument, and a proper plug to match the
output jack of the external audio device on the
other side.
Stereo-mini
plug
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
external audio device and this instrument.
If possible, adjust the playback level of the external
audio device first, to achieve optimum balance.
6
Play the keyboard along with the sound
of the audio device.
28
PSR-E263 YPT-260 Owner's Manual
Audio device (Portable
audio player, etc.)
7
After finishing the performance, stop
playback of the audio device.
CAUTION
• Before connecting, turn off the power of both this
instrument and the external audio device. Also, before
turning the power on or off, make sure to set all vol-
ume levels to minimum (0). Otherwise, damage to the
devices, electrical shock, or even permanent hearing
loss may occur.
NOTICE
• After connecting, first turn on the power to the exter-
nal audio device then to this instrument. Reverse this
order when you turn the power off.
Imprimir página