Yamaha UD-USB01 Manual do Proprietário - Página 2

Procurar online ou descarregar pdf Manual do Proprietário para Teclado eletrónico Yamaha UD-USB01. Yamaha UD-USB01 2 páginas. Usb option unit

Method 1: Installing only this unit to the Electone

Electone

Insert but do not fully tighten one of the screws to the right front

screw hole under the Electone.

Hook this unit (with hole A, shown below) onto the installed screw.

Insert and partially fix

the remaining three

screws. Then, firmly

tighten all four screws.

Connect the USB cable to the USB TO DEVICE terminal.

For Japanese users only

Connecting USB storage devices

While holding this button, pull the unit toward you.

Method 2: Installing both this unit and the UD-FD01 floppy

disk drive to the Electone

None of the included screws are necessary in this method.

Both this unit and the floppy disk drive are installed by using the screws for the floppy disk drive.

Remove the floppy disk drive from the Electone (if the floppy disk drive

has already been installed.) The floppy disk drive can be removed by

reversing the order of the installation instructions described in the

Owner's Manual of the Electone.

Electone

Put this unit on top of the

floppy disk drive as shown.

Then, align the four holes of

these two units.

Temporarily install these

two units together with

screw A.

Insert and partially fix the

remaining three screws.

Then, firmly tighten all four

screws.

Follow step 4 in Method 1.

When connecting a USB storage device to the USB TO DEVICE, make sure that the connector

on the device is appropriate and that it is connected in the proper direction.

USB

USB TO DEVICE

During your performance, make sure to slide the USB unit under the keyboard. If you leave it in the

forward position, there is a danger of hitting it with your hand and breaking the USB device.

USB

UD-FD01

Electone