Yamaha HTR-3065 Manual de configuração - Página 8
Procurar online ou descarregar pdf Manual de configuração para Recetor Yamaha HTR-3065. Yamaha HTR-3065 19 páginas.
Também para Yamaha HTR-3065: Manual de configuração fácil (8 páginas)
Imprimir página
• If any error message (such as E-1) or warning message (such
as W-2) appears, see "Error messages" or "Warning
messages" in "Owner's Manual".
• If the warning message "W-1:Out of Phase" appears, see "If
"W-1:Out of Phase" appears".
3
Use the cursor keys to select "SAVE"
(Save) and press ENTER.
A u t o S e t u p
M e a s u r e m e n t
F i n i s h e d
S t a r t
Result
E x i t
S A V E
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / 10.0 dB
>Save
Cancel
4
Disconnect the YPAO microphone from the
unit.
This completes optimization of the speaker settings.
• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).
If "W-1:Out of Phase" appears
Follow the procedure below to check the speaker
connections.
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
A u t o S e t u p
S t a r t
E x i t
a Check for the blinking of the front display's indicator to
identify the problem speaker.
VOL.
SW
C
L
R
SL
SR
W-1:PHASE
b Check the cable connections (+/-) of the problem
speaker.
If the speaker is connected correctly:
You can save the current settings.
Proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.
M e a s u r e m e n t
F i n i s h e d
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / 10.0 dB
Warning
W-1:Out of Phase
message
Problem speaker (blinks)
VOL.
SW
C
L
R
SL
SR
7
En