Yamaha HTR-5230RDS Manual do Proprietário - Página 13

Procurar online ou descarregar pdf Manual do Proprietário para Recetor Yamaha HTR-5230RDS. Yamaha HTR-5230RDS 50 páginas. Natural sound av receiver

AM loop antenna (included)

Connecting the AM loop antenna

Antenna stand

Outdoor AM antenna

Vinyl covered wire (5 m to 10 m)

Ground (GND terminal)

AM loop antenna

The AM loop antenna can be removed from the stand and

attached to a wall, etc. However, note that the reception

sensitivity may deteriorate if the antenna is attached to a

metal or steel reinforced wall.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

Press the tab and unlock the terminal hole.

Insert the AM loop antenna lead wires into the

AM ANT and GND terminals.

Return the tab to its original position to lock

the lead wires. Lightly pull the lead wires to

confirm a good connection.

Attach the loop antenna to the antenna stand.

Orient the AM loop antenna so that the best

reception is obtained.

If you cannot obtain good reception with the AM loop

antenna, connect 5 m to 10 m of vinyl covered wire to the

AM ANT terminal and extend it outdoors from a window.

For maximum safety and minimum interference, connect

the antenna GND terminal to a good earth ground. A good

earth ground is a metal stake driven into moist earth.

CONNECTIONS